OBD-M-DB9-F-ES Datasheet, PDF (1/12 Pages) List of Unclassifed Manufacturers – DB9 to OBD-II Adapter Cable

EasySYNC Ltd
OBD-M-DB9-F-ES
DB9 to OBD-II Adapter Cable
Data Sheet
Document Reference No.: ES_000045
Version 1.01
Issue Date: 2010-06-25
The DB9 to OBD-II Adapter cable is a simple adapter to allow the EasySYNC range of CANbus
products to mate to OBD-II interface connectors.
The DB9 to OBD-II Adapter Cable supports EasySYNC CANbus products. This cable converts
EasySYNC CANbus products to the CANbus portion of a standard OBD-II interface. Additionally the
CANbus signals also conform to the CAN-in-Automation (CiA) DS102-2 pin-out.
EasySYNC Ltd
Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow, G41 1HH, United Kingdom
Tel.: [phone] Fax: + 44 (0) 141 418 0110
E-Mail (Support): [e-mail] Web: http://easysync-ltd.com/
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced
in any material or electronic form without the prior written consent of the copyright holder. This product and its documentat ion are
supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. EasySYNC Ltd will
not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are n ot affected.
This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product
might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to
change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document.
EasySYNC Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow, G41 1HH, United Kingdom. Scotland Registered Number:
SC224924
Copyright © 2010 EasySYNC Limited