|
HP03S Datasheet, PDF (3/7 Pages) List of Unclassifed Manufacturers – Low voltage, low power consumption | |||
|
◁ |
Hope RF
2010-2-3
VDD Dependency
Temperature Accuracy
Temperature Accuracy
HP03 Series of calibrated sensor module
HP03S
Version: 1.3
2.4~3.6
-1.5
0
1.5
hpa
0~+50
-1.0
1.0
°C
-20~+60
-2.0
2.0
°C
Pressure and Temperature Measurement
The main function of HP03 system is to convert the uncompensated pressure and
temperature signal from a pressure sensor. After the conversion, the following two values
can be obtained:
. measured temperature
âD2â
. measured pressure
âD1â
As the sensor is strongly temperature dependent, it is necessary to compensate for these
effects. Therefore 10 sensor-specific coefficients are stored on the HP03 at our
manufacturing facility, and they allow an accurate software compensation in the
application.
The 7 coefficients are:
. Sensitivity coefficient
. Offset coefficient
. Temperature Coefficient of Sensitivity
. Temperature Coefficient of Offset
. Reference Temperature
. Temperature Coefficient of Temperature
. Offset Fine Tuning
âC1â
âC2â
âC3â
âC4â
âC5â
âC6â
âC7â
4 sensor parameter
. Sensor Specific Parameter
âA,B,C,Dâ
Note: Make sure to pull low XCLR before start to Read these coefficients or the data read
out is probably incorrect
Parameter Range(Hex:Dec)
C1
0x100 -- 0xFFFF
:
256 -- 65535
C2
0x00 -- 0x1FFF
;
0 -- 8191
C3
0x00 -- 0x400
;
0 -- 3000
C4
0x00 -- 0x1000
;
0 -- 4096
C5
0x1000 -- 0xFFFF ;
4096 -- 65535
C6
0x00 -- 0x4000
;
0 -- 16384
C7
0x960 -- 0xA28
;
2400 -- 2600
C,D
0x01 -- 0x0F
;
1 -- 15
A,B
0x01 -- 0x3F
;
1 -- 63
D1
0x00 -- 0xFFFF
;
0 -- 65535
D2
0x00 -- 0xFFFF
;
0 -- 65535
Page 3 of 7
|
▷ |