FGSR12SR6003A Datasheet, PDF (3/23 Pages) List of Unclassifed Manufacturers – 3-14.4Vdc Input, 3A, 0.6-5.5Vdc Output

Delivering Next Generation Technology
Series
FGSR12SR6003*A
3-14.4Vdc Input, 3A, 0.6-5.5Vdc Output
Data Sheet
Electrical Specifications (Continued)
PARAMETER
NOTES
MIN
OUTPUT CHARACTERISTICS
Output Voltage Set Point (no load)
Output Voltage Range
Adjustment Range
(selected by an external resistor)
Remote Sense Range
With 0.1% tolerance for external resistor
used to set output voltage
-1.0
(Over all operating input voltage,
resistive load and temperature
-3.0
conditions until end of life)
Some output voltages may not be
possible depending on the input voltage 0.6
– see feature description section
Output Regulation (for Vo ≥ 2.5Vdc)
Line (Vin = min to max)
Load (Io = min to max)
Output Regulation (for Vo < 2.5Vdc)
Line (Vin = min to max)
Load (Io = min to max)
Temperature (Ta = min to max)
Output Ripple and Noise
Vin=12V, Io= min to max, Co =
0.1uF+22uF ceramic capacitors
Peak to Peak
5MHz to 20MHz bandwidth
RMS
External Load Capacitance ¹
5MHz to 20MHz bandwidth
Plus full load (resistive)
Without the Tunable Loop
ESR ≥ 1mΩ
10
With the Tunable Loop
ESR ≥ 0.15mΩ
10
ESR ≥ 10mΩ
10
Output Current Range
(in either sink or source mode)
0
Output Current Limit Inception (Hiccup mode)
Current limit does not operate in sink
mode
Output Short-Circuit Current
Vo ≤ 250mV, Hiccup mode
Efficiency
Vin = 12Vdc, Ta = 25°C, Io = max
Vout=5.0Vdc
Vout=3.3Vdc
Vout=2.5Vdc
Vout=1.8Vdc
Vout=1.2Vdc
Vout=0.6Vdc
Switching Frequency
TYP MAX UNITS
+1.0 %Vout
+3.0 %Vout
5.5
Vdc
0.5
Vdc
0.4 %Vout
10
mV
5
mV
10
mV
0.4 %Vout
50
100 mVp-p
20
38 mVrms
%
22
uF
1,000
uF
3,000
uF
3
Adc
200
% Io-max
0.5
Arms
93.9
%
91.6
%
89.9
%
88.2
%
82.8
%
75.0
%
600
kHz
1 _{External capacitors may require using the new Tunable Loop}TM _{feature to ensure that the module is stable as well as getting the best}
transient response. See the Tunable Loop^TM section for details.
Http://www.fdk.com
Page 3 of 23
Ver 2.0 Nov. 11, 2013