BXRA-56C5300 Datasheet, PDF (3/28 Pages) List of Unclassifed Manufacturers – Bridgelux RS Array Series

Typical Product Features
Bridgelux arrays are fully engineered devices that provide consistent thermal and optical performance on an
engineered mechanical platform. The RS array is the largest chip-on-board device in the BXRA LED Array
product series. The arrays incorporate several features to simplify design integration and assembly.
Figure 1: Array Features
Fully engineered substrate for
consistent thermal, mechanical
and optical properties
Yellow phosphor
Light Emitting
Surface (LES)
Solder Pad
Polarity Indication
simplifies assembly
instructions
Manufacturer identification: genuine Bridgelux
Solder Pad
White ring
around LES
Index features assist
accurate orientation
during assembly
Mounting Holes
Case Temperature (Tc)
Measurement Point
Note: Part number and lot codes are scribed on back of array
Product Nomenclature
The part number designation for Bridgelux LED Arrays is explained as follows:
BXRA – AB C DEFG – H – IJ
Where:
B X R A – Designates product family
A B – Designates the nominal ANSI color temperature; 27 = 2700K; 30 = 3000K, etc.
C - Designates minimum CRI; C = 70, E = 80, G = 90
D E F G - Designates Nominal Flux; 4000 = 4000lm, 7000 = 7000lm, etc.
H – Designates configuration
I J – Designates CCT color binning
03 = 3SDCM or 3-step
04 = 4SDCM or 4-step
00 = 7SDCM or 7-step
Bridgelux RS Array Series Product Data Sheet DS25 (8/30/2013 rev3)
Page 3 of 28