70207 Datasheet, PDF (3/4 Pages) List of Unclassifed Manufacturers – LINEARlight MULTI FLEX Long life: Up to 50,000 hours

Accessories
Item Number
70206
70187
70188
70220
70207
Ordering Abbreviation
LLMULTIFLX/STR-CHANNEL
LLMULTIFLX/THN/FLX-CHANNEL
LLMULTIFLX/THN/STR-CHANNEL
LLMULTIFLX/INSTALL-SCREWS
LLMULTIFLX/INSTALL-TOOL
Description
Used with 70182 & 70205
Used with 70181
Used with 70182 & 70205
Assembly Diagram
Safety Information
1. The LED module and all of its components must not be subjected to mechanical stress.
2. Assembly must not damage or destroy conducting paths.
3. The LED module incorporates no protection against short circuits, overload or overheating. Therefore, it is absolutely necessary to operate the modules with an electrically
stabilized power supply offering protection against the above mentioned safety risks. OPTOTRONIC power supplies are specifically designed with protection features
for safe operation. Use of third party power supplies is not recommended.
4. Installation of the LED Modules and SYLVANIA LED power supplies should adhere to all applicable electrical and safety standards. Only qualified personnel should perform
installations.
5. Correct electrical polarity needs to be observed. Incorrect polarity may destroy the module.
6. All LED modules, up to the maximum number allowable for the power supply, should be installed in a parallel electrical connection (red to red and black to black), with a
maximum of three modules in series. See note #2 in the Electrical Connection section on next page.
7. Pay attention to standard ESD precautions when handling and installing the module.
8. Only install according to the parameters outlined in the Assembly Information section.