700D158911-590 Datasheet, PDF (3/4 Pages) List of Unclassifed Manufacturers – Power Ring Film CapacitorsTM

Power Ring Film CapacitorsTM
SBE Part 700D158911-590
Mechanical Mounting and Additional Thermal Notes:
This capacitor is optimized for extremely low self
inductance when connected to a suitable laminar bus
structure.When so connected, the capacitor is very
rigidly attached to such a structure and thus does not
necessarily need to be mounted to a chassis. However,
the capacitor case can be attached to an application
surface/heat sink, etc. if desired.When so mounted,
the capacitor can be part of the bus structure sup-
port.Use of thermal interface compound between the
capacitor case and application surface/heat sink will
assist with removal of capacitor and bus heat.Note
that the capacitor internal heating is VERY small, and
other bus structure heat sources are very likely signifi-
cantly higher than the heat added to the bus by the
capacitor.Capacitor dissipation is approximately 7.5W
at 254Arms, from 1-100KHz.It is highly recommended
to use infrared thermal imaging from a system cold
start to determine the location and relative magnitude
of thermal input to the bus.The capacitor may well
function as a thermal conduit for bus structure heat,
and it will be very possible that the capacitor internal
hot spot is less than the terminal temperature.
Thermal contour maps are available for some repre-
sentative conditions.
Layout Details:
NOTES:
1. All Hole Positions Inspected
2. All Dimensions Inspected Unless
Marked As Reference
7X 45.0°
10.070
Bolt Circle
A
REV.
01
22.5°
DESCRIPTION
Initial Release
Revisions
C
16X M5X0.8 - 6H THRU
28 in-lbs MAX Torque
.020 A B C
CHG CHK APR
BY BY BY
-
-
-
DATE
-
B
12.563
Bolt Circle
12.323
13.583
Bolt Circle
.259 1.000
Accepts 1/4" Plastite Screw
40 in-lbs MAX Torque
.197±.005 THRU
Accepts 1/4" Plastite Screw
0.040
16 Surfaces
40 in-lbs MAX Torque
.020 A B C
A
.275
2.812
1.000
.663
.500
.288
NON-TOLERANCED DIMENSIONS ARE BASIC
.010 A B C
UNLESS OTHERWISE SPECIFIED:
ALL DIMENSIONS ARE IN INCHES
SBE, INC.
81 PARKER ROAD
BARRE, VT 05641 USA
802.476.4146 FAX: [phone]
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SBE. ANY
DETAIL A
SCALE 1 : 1
REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SBE IS PROHIBITED.
MATERIAL
GEOMETRIC TOLERANCING PER: Y14.5-2009
TITLE
Power Ring Capacitor,
1500uF, 1100VDC
DRAWN
CHECKED
ENG APPR.
MGS
DMB
MSB
11/8/2012
11/8/2012 ^{DWG. NO.}
11/12/2012 ^700D590LV
FINISH
DO NOT SCALE DRAWING ^SIZE A ^REV 01 SHEET 1 OF 1
Contact SBE Inc. to discuss your specific requirements.
SBE reserves the right to amend design data
At the Leading Edge of Film Capacitor Technology®