ATAVRDRAGON Datasheet, PDF (29/29 Pages) List of Unclassifed Manufacturers – Introducing AVR Dragon

Introduction
Page 29 of 29
System Unit
Physical Dimensions...................................... ( H x W x D ) 53 x 105 x 15 mm
Power Voltage Requirements........................... 5.0V USB powered
AVR Dragon Current Consumption................... 100mA
Max Current Source Capability (to target)......... 300mA
Ambient Temperature.......................................0-70'C
Operation
Target Voltage Range.......................................1.8 - 5.5 V
I/O Pins
Maximum Pull-up on ISP/JTAG header........... 1K
Maximum Pull-down on ISP/JTAG header...... 10K
Maximum Source Current VCC header........... up to total 300mA.
Note that the AVR Dragon requires a USB port that can deliver up to 500mA. (self-powered
USB hub)
Technical Support
Before requesting techical support make sure you have the latest available AVR Studio,
tool firmware installed. The latest AVR Studio version can be downloaded from
www.atmel.com/avrstudio, and contains the latest firmware version for all Atmel AVR tools.
When connecting your tool, AVR Studio will automatically check the firmware version and
request an update if needed.
For technical support please contact [e-mail]. When requesting technical support
for AVR Dragon please include the following information:
Version number of AVR Studio. This can be found in AVR studio menu "Help->About"
PC processor type and speed
PC operating system and version
What target AVR device is used (Complete part number)
Fuse settings on the AVR
Target clock frequency
If CLKPR (Clock Prescaler Register) is used (for AVRs with this feature)
Target voltage
Programming speed
A detailed description of the problem, and how to recreate it.
Any error or waring information generated by AVR Studio when the error occurred.
file://C:\Documents and Settings\Administrator\...\~hh90C1.ht 2006-10-27