English
Language : 

RFM23BP Datasheet, PDF (26/62 Pages) List of Unclassifed Manufacturers – ISM TRANSCEIVER MODULE
RFM23BP
3.5.7. TX Data Rate Generator
The data rate is configurable between 0.123–256 kbps. For data rates below 30 kbps the ”txdtrtscale” bit in register
70h should be set to 1. When higher data rates are used this bit should be set to 0.
The TX date rate is determined by the following formula in kbps:
DR_TX (kbps) = t--x----d----r--[--1----5---:--0---]----×-----1-----M-----H----z--
216 + 5 × txdtrtscale
txdr[15:0] = D----R-----_---T----X----(--k---b---p---s---)----×-----2----1--6----+----5----×---t--x---d---t-r--t--s---c--a---l--e-
1 MHz
For data rates higher than 100 kbps, Register 58h should be changed from its default of 80h to C0h. Non-optimal
modulation and increased eye closure will result if this setting is not made for data rates higher than 100 kbps. The
txdr register is only applicable to TX mode and does not need to be programmed for RX mode. The RX bandwidth
which is partly determined from the data rate is programmed separately.
Add R/W Function/Description D7
D6
D5
D4
D3
D2
D1 D0 POR Def.
6E R/W
TX Data Rate 1
txdr[15] txdr[14] txdr[13] txdr[12] txdr[11] txdr[10] txdr[9] txdr[8] 0Ah
6F R/W
TX Data Rate 0
txdr[7] txdr[6] txdr[5] txdr[4] txdr[3] txdr[2] txdr[1] txdr[0] 3Dh
Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com 27