RFM23BP Datasheet, PDF (10/62 Pages) List of Unclassifed Manufacturers – ISM TRANSCEIVER MODULE

RFM23BP
Table 8. Absolute Maximum Ratings
Parameter
Value
Unit
V_DD to GND
Instantaneous V_RF-peak to GND on TX Output Pin
Sustained V_RF-peak to GND on TX Output Pin
Voltage on Digital Control Inputs
Voltage on Analog Inputs
RX Input Power
–0.3, +8.3
–0.3, +8.3
–0.3, +8.3
–0.3, V_DD + 0.3
–0.3, V_DD + 0.3
+10
V
V
V
V
V
dBm
Operating Temperature Range (special crystal is used on the module) T _S
–40 to +85
°C
Operating Temperature Range (Normal crystal is used on the module) T _N
–20 to +60
°C
Thermal Impedance θ_JA
30
°C/W
Storage Temperature Range T_STG
–55 to +125
°C
Note: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These
are stress ratings only and functional operation of the device at or beyond these ratings in the operational sections of
the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability. Power Amplifier may be damaged if switched on without proper load or termination connected. TX
matching network design will influence TX V_RF-peak on TX output pin. Caution: ESD sensitive device.
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com
10