70053K Datasheet, PDF (25/28 Pages) List of Unclassifed Manufacturers – THE ADVANTAGES AND BENEFITS OF USING AMVECO TOROIDAL TRANSFORMERS

LOW PROFILE MINIATURE TRANSFORMERS
Power
VA
1.6
3.2
5.0
7.0
10.0
15.0
25.0
35.0
50.0
I
`
Dim.
Part Sec-Full Current No Load No- Reg. ∆t Eff ODxIDxHT
Number Load V
mA Voltage Load % °C %
mm
62000
2x7
114
2x8.94
62001
2x9
89
2x11.63
62002
2x12
62003
2x15
62004
2x18
67
2x15.43
1.0
29
10
77
53
2x19.30 _(mA)
44
2x23.41
62005
2x22
36
2x28.19
62010
2x7
229
2x10.2
62011
2x9
178
2x13.0
62012
2x12
62013
2x15
133
2x17.3 1.5
107
2x21.4 (mA) ⁴¹
20
70
62014
2x18
89
2x25.7
62015
2x22
73
2x31.3
62020
2x7
357
2x9.7
62021
2x9
278
2x12.4
62022
2x12
62023
2x15
208
2x17.0 2.0
167
2x21.3 (mA) ⁴⁵
29
70
62024
2x18
139
2x25.5
62025
2x22
114
2x30.5
62030
2x7
500
2x9.5
62031
2x9
389
2x12.2
62032
2x12
62033
2x15
292
2x16.2 3.0
233
2x20.3 (mA) ³⁴
25
74
62034
2x18
194
2x24.3
62035
2x22
159
2x29.7
62040
2x7
714
2x8.3
62041
2x9
556
12x10.8
62042
2x12
62043
2x15
417
2x14.4
3.0
20
24
82
333
2x18.0 (mA)
62044
2x18
278
2x21.7
62045
2x22
227
2x26.3
62050
2x7
1071
2x8.9
62051
2x9
833
2x11.1
62052
2x12
62053
2x15
625
2x14.8 4.0
500
2x18.5 (mA) ²³
27
81
62054
2x18
417
2x22.2
62055
2x22
341
2x27.2
62060
2x7
1785
2x8.3
62061
2x9
1377
2x10.7
62062
2x12
62063
2x15
1041
2x14.2 5.0
832
2x17.8 (mA) ¹⁹
28
84
62064
2x18
694
2x21.4
62065
2x22
568
2x26.2
62070
2x7
2500
2x8.4
62071
2x9
1944
2x10.6
62072
2x12
62073
2x15
1458
2x14.0 7.0
1166
2x17.6
(mA) ^17.7
31
85
62074
2x18
972
2x20.9
62075
2x22
795
2x25.7
62080
2x7
3571
2x8.1
62081
2x9
2777
2x10.4
62082
2x12
62083
2x15
2083
2x13.8 8.0
1666
2x17.3
(mA) ^15.5
30
86
62084
2x18
1388
2x20.7
62085
2x22
1136
2x25.4
(Electrical measurements @ 20°C ambient temperature)
All data subject to change without prior notice.
The 62000-series Miniature toroidal step-down transformers offers the
design engineer the same features as our larger toroidal power transform-
ers, namely, very low EMR (magnetic strayfields), quiet operation, low tem-
perature rise, low profile, low no-load current and very low no-load losses.
STANDARD FEATURES
• Primary voltage of 115V or 230V at 50 / 60Hz.
• Safety standard certification (UL 506), design construction meet UL 1950,
VDE 0805, IEC 950, EN 60950.
• UL recognized for insulation Class A (105C). Meets all requirements of
Class E (125C)
• UL certifications to +40˚C (1.6VA-25VA)
• Hipot testing at 4000V between primary and secondary. (VDE0550)
• Maximum ambient temperature of +60˚C
• Epoxy potted center with through hole for M4 bolt
CUSTOM DESIGN OPTIONS
With minimum order of 1000 pieces custom specified primary and sec-
ondary voltages are available. Please contact the Houston factory or your
local Amveco sales representative for details.
WIRE DIAGRAM AND SCHEMATICS
For 230V operation, connect primaries in series by connecting black and red
lead wires together and apply 230V across yellow and violet leads wires.
For 115V operation, connect primaries in parallel by connecting yellow and
red lead wires together and black and violet leads wires.
To parallel the secondaries, connect green and brown wires and red and
blue together. To connect the secondaries in series, the red and brown
wires are connected together. Take the output across the green and
blue wires.
Minimum order quantity is 500 pieces per part number. For less than 500
pieces of part number 62060 through 62085, please contact our distributor
Digikey Corporation at 800-344-4539 or order on line at www.digikey.com
24
AMVECO Magnetics, Inc. • 10401 Westoffice Dr. • Houston, TX 77042 • [phone] • [phone] • Fax: [phone] • Email: [e-mail] • www.amveco.com