SBN0064G Datasheet, PDF (24/37 Pages) List of Unclassifed Manufacturers – Dot-matrix STN LCD 64-SEGMENT Driver with 64-row x 64-column Display Data Memory

Avant Electronics
SBN0064G
Dot-matrix STN LCD 64-SEGMENT Driver with 64-row x 64-column Display Data Memory
11 MAXIMUM RATING
11.1 Absolute maximum rating
Table 21 Absolute maximum rating
SYMBOL
V_DD
V_EE
V_LCD (note 2)
V_I
P_D
T_stg
T_amb
Tsol (note 3)
PARAMETER
voltage on the V_DD pin(pad)
voltage on the V_EE pin(pad)
LCD bias voltage, V_LCD=V0-V5
input voltage on any pin with respect to V_SS
power dissipation
storage temperature range
operating ambient temperature range
soldering temperature/time at pin
MIN.
−0.3
V_DD - 16
−0.3
−55
-30
MAX.
+7.0
13
V_DD + 0.3
200
+125
+ 85
260 °C,
10 Second
UNIT
volt
mW
°C
°C
Notes
1. The following applies to the Absolute Maximum Rating:
a) Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device.
b) The SBN0064G includes circuitry specifically designed for the protection of its internal devices from the damaging
effect of excessive static charge (ESD). However, it is suggested that conventional precautions be taken to avoid
applying greater than the rated maxima.
c) Parameters are valid over operating temperature range unless otherwise specified.
d) All voltages are with respect to V_SS, unless otherwise noted.
2. The condition V_DD(V0)≥ V1 ≥ V2 ≥ V3 ≥ V4 ≥ V5 must always be met.
3. QFP-type packages are sensitive to moisture of the environment, please check the drypack indicator on the tray
package before soldering. Exposure to moisture longer than the rated drypack level may lead to cracking of the
plastic package or broken bonding wiring inside the chip.
2005 May 20
24 of 37
data sheet (v3)