10000200 Datasheet, PDF (24/164 Pages) List of Unclassifed Manufacturers – Let Rose+Bopla be your partner for standard or customized enclosures.

Polymas Watertight Enclosures
• Especially suitable for fitting small electronic components and terminal blocks
• Available with or without molded-on cable glands and with or without quick-release
lid screws
• Mounting bosses for self-tapping screws provided for the assembly of terminal blocks,
DIN rails or PCBs
Included in delivery
Enclosure consisting of lid and base; lid screws, or quick-
release lid screws; depending on design with molded-on
cable glands PG 11 including clamping cage, pressure
screw, and closed sealing ring.
Technical Data
Material
Ingress Protection
Color
Lid Seal
Polyamide 6, 30% glassbead-reinforced. UV stabilized
IP 65 DIN EN 60529. Increased protection up to IP x7 on request.
Gray, similar to RAL 7001
Neoprene
Enclosure Type
Part Number
Dimensions
Dimensions
mm
WxLxH
Inches
WxLxH
PK 101*
38101000 00
58 x 64 x 34
2.28 x 2.52 x 1.34
PK 101-111*
38101100 00
58 x 64 x 34
2.28 x 2.52 x 1.34
PK 101-211*
38101200 00
58 x 64 x 34
2.28 x 2.52 x 1.34
PK 101 SV
38101500 00
58 x 64 x 34
2.28 x 2.25 x 1.34
PK 101 SV-111
38101600 00
58 x 64 x 34
2.28 x 2.25 x 1.34
PK 101 SV-211
38101700 00
58 x 64 x 34
2.28 x 2.25 x 1.34
PK 102*
38102000 00
98 x 64 x 34
3.86 x 2.52 x 1.34
PK 102-211*
38102200 00
98 x 64 x 34
3.86 x 2.52 x 1.34
PK 102-411*
38102400 00
98 x 64 x 34
3.86 x 2.52 x 1.34
PK 102 SV
38102500 00
98 x 64 x 34
3.86 x 2.52 x 1.34
PK 102 SV-211
38102700 00
98 x 64 x 34
3.86 x 2.52 x 1.34
PK 102 SV-411
38102900 00
98 x 64 x 34
3.86 x 2.52 x 1.34
PK 105*
38105000 00
75 x 80 x 57
2.95 x 2.52 x 2.24
PK 105 SV
38105500 00
75 x 80 x 57
2.95 x 2.52 x 2.24
PK 110*
38110000 00
125 x 80 x 57
4.91 x 2.52 x 2.24
PK 110 SV
38110500 00
125 x 80 x 57
4.91 x 2.52 x 2.24
PK 115*
38115000 00
175 x 80 x 57
6.89 x 2.52 x 2.24
PK 115 SV
38115500 00
175 x 80 x 57
6.89 x 2.52 x 2.24
*Available with transparent polycarbonate lid for quantities exceeding 500 pieces.
Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only.
22
www.Rose-Bopla.com