HC49153020SR3RDBUT Datasheet, PDF (21/31 Pages) List of Unclassifed Manufacturers – SPECIFYING QUARTZ CRYSTALS

Minimum Order Information Required
n _{Frequency + Holder + Frequency Tolerance @ 25°C + Frequency Stability + Operating Temperature Range +}
Circuit Condition + Overtone Order
Electrical Specification – maximum limiting values
Frequency Range Frequency Tolerance
Operating
Frequency Stability Available Over
ESR
@ 25°C ±2°C
Temperature Range
Operating Temperature
max.
Vibration
Mode
Minimum
Maximum
3.5 to <5.0MHz
±15ppm to ±100ppm
0 to 50°C
–10 to 60°C
±15ppm
±20ppm
±100ppm
±100ppm
200W
Fundamental
AT cut
–20 to 70°C
±20ppm
±100ppm
–30 to 80°C
±25ppm
±100ppm
–40 to 90°C
±30ppm
±100ppm
–55 to 105°C
±100ppm
±500ppm
5.0 to <8.0MHz
±15ppm to ±100ppm
0 to 50°C
–10 to 60°C
±15ppm
±20ppm
±100ppm
±100ppm
120W
Fundamental
AT cut
–20 to 70°C
±20ppm
±100ppm
–30 to 80°C
±25ppm
±100ppm
–40 to 90°C
±30ppm
±100ppm
–55 to 105°C
±100ppm
±500ppm
8.0 to <12.0MHz
±15ppm to ±100ppm
0 to 50°C
–10 to 60°C
±10ppm
±15ppm
±100ppm
±100ppm
70W
Fundamental
AT cut
–20 to 70°C
±15ppm
±100ppm
–30 to 80°C
±20ppm
±100ppm
–40 to 90°C
±50ppm
±100ppm
–55 to 105°C
±50ppm
±100ppm
12.0 to 25.0MHz
±15ppm to ±100ppm
0 to 50°C
–10 to 60°C
±10ppm
±15ppm
±100ppm
±100ppm
50W
Fundamental
AT cut
–20 to 70°C
±15ppm
±100ppm
–30 to 80°C
±20ppm
±100ppm
–40 to 90°C
±50ppm
±100ppm
–55 to 105°C
±50ppm
±100ppm
20.0 to 40.0MHz
Inclusive with Frequency
Stability
0 to 50°C
–10 to 60°C
±50ppm
±50ppm
±100ppm
±100ppm
50W
Fundamental
BT cut
–20 to 70°C
±100ppm
±100ppm
–30 to 80°C
±100ppm
±100ppm
25.0 to 70.0MHz
±15ppm to ±100ppm
0 to 50°C
–10 to 60°C
±15ppm
±20ppm
±100ppm
±100ppm
100W
3rd Overtone
AT cut
–20 to 70°C
±20ppm
±100ppm
–30 to 80°C
±25ppm
±100ppm
–40 to 90°C
±50ppm
±100ppm
–55 to 105°C
±50ppm
±100ppm
Please Note: Frequencies 3.0 to 3.5MHz are available; AT fundamentals are available up to 32.0MHz: please contact the sales office for more information.
Europe Tel: [phone] Fax: [phone]
21
Americas Tel: [phone] Fax: [phone]