SEM1630 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – UNIVERSAL DIN RAIL TRIP AMPLIFIER

UNIVERSAL DIN RAIL TRIP AMPLIFIER
SPECIFICATION
INPUTS
INPUT
RANGE
ACCURACY
(Note 1)
K (-200 to 1370) °C 0.1 % of FSR ±0.5 °C
J
(-100 to 1200) °C (type T 0.2 % FSR. ± 0.5 °C)
E (-100 to 1000) °C
N (-180 to 1300) °C
T (-100 to 400) °C
R (-10 to 1760) °C ± 0.5 °C ±0.1 % of FSR
(Note 2)
S (-10 to 1760) °C ± 0.5 °C ±0.1 % of FSR
(Note 2)
mV (-40 to 75) mV ± 0.04 mV
P (-200 to 850) °C ± 0.1 °C / ±0.05 % of rdg
mA (-10 to 25) mA ± 0.008 mA
STABILITY
± 0.01 % of FSR
O/C
CJ
Sensor IMPEDANCE
(Note 3) excitation
(Note 4)
Yes Yes
-
1 MΩ
(Note 5)
-
± 0.005 % of FSR
-
± 0.01 % of FSR -
-
<450 uA
-
-
2.7 R (Note 6)
Key
Rdg = Reading ; FSR = Full Scale Range ; O/C = programmable open circuit sensor detect; CJ = Cold junction error
Notes
1. Accuracy for PT100 and T/C do not include sensor and cold junction errors.
2. Only over the range (800 to 1600) °C
3. Cold junction range (-20 to 70) °C, Accuracy ± 0.5 °C , Tracking ± 0.05 °C
4. PT100 input Maximum lead resistance 20 R, Lead effect 0.015 °C / Ω.
5. Impedance – not including 0.2 uA open circuit detect bias current effect.
6. Maximum current over load ± 100 mA.
OUTPUT
Type
Supply
Response time
Contact rating
Trip Type
Ranges
Hysteresis
Protection
Dual Form C relay contacts
24 V dc ± 5 % @ 40 mA Max
< 500 ms to reach 95 % of final value ; Start up time < 3 s
250 V ac rms @ 1A ; 30 V dc @ 1 A resistive load
Individual trips A & B may be set at high or low level, full range setpoint plus adjustable hysteresis
Setpoint programmed on units, covering full range of input.
Set in units.
Reverse connection and over-voltage protection. Max over voltage current 100 mA.
GENERAL
Isolation
Ambient
Approvals
Input to output tested at 500 V dc.
operating (-20 to 70) °C (10 to 95) % RH non condensing. Storage (-40 to 85) °C
CE tested to BS EN 61326
MECHANICAL
Material
Terminals
Cable
Colour
Polmide 6.6
Self extinguishing
Screw terminal
2.5 mm Max.
Grey
12 3
45 6
TRIP A
TRIP B
RANGE
1
2
USB
78 9
10 11 12
17.5 mm
Status Instruments Ltd
Green Lane Business Park
Green Lane, Tewkesbury
Gloucestershire, UK
GL20 8DE
90 mm
56.4 mm
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.status.co.uk
D2446-01-04 sem1630 data sheet
REFER TO
INSTRUCTION
MANUAL
BEFORE USE
ORDER CODE : SEM1630
ASSOCIATED PRODUCTS
ORDER CODES
USB CABLE A/M TO MINI B/M
48-200-0001-01
M-CONFIG S/W
48-605-1150-03
FOC
SEM1603P/TC/I
SEM1610
SEM1620
LOW COST SINGLE I/P DIN RAIL TRANSMITTER
UNIVERSAL DIN RAIL TRANSMITTER (4 to 20) mA O/P
UNIVERSAL DIN RAIL TRANSMITTER VOLTAGE OUTPUT