SEM1630 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – UNIVERSAL DIN RAIL TRIP AMPLIFIER

UNIVERSAL DIN RAIL TRIP AMPLIFIER
SEM1630
SIMPLE CONFIGURATION VIA USB PORT
UNIVERSAL PT100, THERMOCOUPLE, mV, mA Input
ISOLATED INPUT
DUAL RELAY OUTPUTS 250 V AC 1A
RELAY ISOLATED FROM EACH OTHER
10 YEAR WARRANTY
INTRODUCTION
The SEM1630 is the new generation DIN rail mounted trip amplifier from Status Instruments. It has been designed to accept most
common process and temperature sensor inputs and provide the user with a dual trip output. Isolation is provided on all three ports.
All temperature ranges are linear to temperature.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable
between the SEM1630 and your PC. Using our free configuration software, your PC will automatically upload the existing
configuration data and guide you through any changes you wish to make. To further help save time, the SEM1630 does not need to be
wired to a power supply during the configuration process, it is powered via the USB interface from your PC. The following parameters
are configurable :-
INPUT TYPE
UNITS
TRIP A
Level
TRIP A
Setpoint
TRIP A
Hysteresis
TRIP B
Level
TRIP B
Setpoint
TRIP B
Hysteresis
PT100
T/C K, J, E, N, T, R, S
mV
°F, °C,
High
mV & mA Low
Set in units Set in units High
Low
Set in units Set in units
mA
The range led indicates out of range input during normal operation.
Alarm LEDs are provided for each trip.
SEM1630
+
10
mA
PT100
+
mV
-
-
9
+₈
-⁷
Universal Input
USB
11 ⁺
1 n/o
2 n/c Trip B
3^c
+
Vs
4 _n/o
5 n/c Trip A
-
6c
12 _-
Dual trip Output