DAQ-2000 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – 4-CH 14/16-Bit Up to 2 MS/s Simultaneous-Sampling Multi-Function DAQ Cards

Ordering Information / Quick Selection Guide
Model Name
Analog Input
No. of
channels
Resolution
Sampling
rate
Input range
No. of
channels
PXI/DAQ/DAQe-2010 4-CH DI 14 bits 2 MS/s ±1.25 V to ±10 V
2
PXI/DAQ/DAQe-2005 4-CH DI 16 bits 500 kS/s ±1.25 V to ±10 V
2
PXI/DAQ/DAQe-2006 4-CH DI 16 bits 250 kS/s ±1.25 V to ±10 V
2
High-Performance DAQ
1
Software &
Utilities
Analog Output
Resolution
Update rate
12 bits
12 bits
12 bits
1 MS/s
1 MS/s
1 MS/s
DIO
Timer/Counter
No. of channels No. of channels
24-CH 8255 PIO
24-CH 8255 PIO
24-CH 8255 PIO
2-CH, 16-bit
2-CH, 16-bit
2-CH, 16-bit
2
DAQ
3
PXI/PXIe
Specifications
Model Name
Analog Input
Resolution
Number of channels
Maximum sampling rate
Programmable gain
Bipolar input ranges
Unipolar input ranges
Offset error
Gain error
Input Coupling
Overvoltage protection
Input Impedance
CMRR (gain = 1)
-3 dB small signal bandwidth (gain = 1)
Trigger sources
Trigger modes
FIFO buffer size
Data transfers
Analog Output
Number of channels
Resolution
Output ranges
Maximum update rate
Slew rate
Settling time
Offset error
Gain error
Driving capacity
Stabililty
Trigger sources
Trigger modes
FIFO buffer size
Data transfers
Digital I/O
Number of channels
Compatibility
Data transfers
Timer/Counter
Number of channels
Resolution
Compatibility
Base clock available
Auto Calibration
Onboard reference
Temperature drift
Stabililty
General Specifications
Dimensions
Connector
Operating temperature
Storage temperature
Humidity
Power requirements
PXI/DAQ/DAQe-2010
PXI/DAQ/DAQe-2005
14 bits
16 bits, no missing codes

4 simultaneous-sampling channels with differential input
2 MS/s
500 kS/s

1, 2, 4, 8

±10 V, ±5 V, ±2.5 V, ±1.25 V
0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V
±3 mV
2 mV
±0.1% of FSR
±0.04% of FSR

DC
Power on: Continuous ±35 V, Power off: Continuous ±15 V
1 GΩ/100 pF

85 dB
1 MHz
1 MHz
Software, external digital/analog trigger, SSI bus
Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
8 k samples
512 samples

Polling, scatter-gather DMA


2 voltage outputs

12 bits
0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF
1 μs
20 V/μs
3 μs to ±0.5 LSB accuracy
±3mV
±1mV
±0.05% of max. output
±0.04% of max. output

5 mA

Any passive load, up to 1500 pF

Software, external digital/analog trigger, SSI bus

Post-trigger, delay-trigger, and repeated trigger

2 k samples
Programmed I/O, scatter-gather DMA

8255 24-bit programmable input/output
5 V/TTL

Programmed I/O


2

16 bits
5 V/TTL
40 MHz , external clock up to 10 MHz




+5 V
±2 ppm/˚C
6 ppm/1000 Hrs



160 mm x 100 mm (not including connectors) (PXI-2000 series)
175 mm x 107 mm (not including connectors) (DAQ-2000 series)
168 mm x 107 mm (not including connectors) (DAQe-2000 series)


68-pin VHDCI-type female
0 to 55˚C
-20 to 70˚C

+5 V 1.82 A typical (PXI/DAQ-2010)
+3.3 V 1.246 A, +12 V 0.448 A
typical (DAQe-2010)
5 to 95%, non-condensing
+5 V 2.04 A typical (PXI/DAQ-2005)
+3.3 V 1.03 A, +12 V 0.75 A
typical (DAQe-2005)
PXI/DAQ/DAQe-2006
16 bits, no missing codes
250 kS/s
±1 mV
±0.03% of FSR
600 kHz
512 samples
±1mV
±0.04% of max. output
4
Modular
Instruments
5
GPIB & Bus
Expansion
6
Motion
Control
7
Real-time
Distributed
I/O
8
PAC
9
Remote I/O
10
Communi-
cations
11
Vision
12
Fanless
Embedded
Computers
13
+5 V 1.82 A typical (DAQ-2006)
+3.3 V 1.02 A, +12 V 0.67 A
typical (DAQe-2006)
cPCI &
Industrial
Computers
www.adlinktech.com ^2-14