DAQ-2000 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 4-CH 14/16-Bit Up to 2 MS/s Simultaneous-Sampling Multi-Function DAQ Cards

PXI/DAQ/DAQe-2000 Series
4-CH 14/16-Bit Up to 2 MS/s Simultaneous-Sampling Multi-Function DAQ Cards
DAQ-2010
PXI-2010
DAQe-2010
Introduction
ADLINK's PXI/DAQ/DAQe-2000 series of products are simultaneous-sampling multi-function
DAQ cards to meet a wide range of application requirements. The devices can simultaneously
sample 4 AI channels with differential input configurations in order to achieve maximum noise
elimination. They also provide 2-CH 12-bit analog outputs with waveform generation capability,
which can be performed together with analog input functions. If more analog input or output
channels are required, multiple cards can be synchronized through the SSI (System Synchronization
Interface) bus. This makes the PXI/DAQ/DAQe-2000 series ideal for stimulus/response testing.
The PXI/DAQ/DAQe-2000 series also features analog and digital triggering, 24-CH programmable
digital I/O lines, and 2-CH 16-bit general-purpose timer/counter. The auto-calibration functions
adjust the gain and offset to within specified accuracies such that you do not have to adjust
trimpots to calibrate the cards.
Features
■ Supports a 32-bit 3.3 V or 5 V PCI bus (DAQ-2000 series)
■ x1 lane PCI Express^® Interface (DAQe-2000 series)
■ PXI specification Rev. 2.2 compliant (PXI-2000 series)
■ 4-CH differential analog inputs
■ Bipolar or unipolar analog input ranges
■ Programmable gains of x1, x2, x4, x8
■ Scatter-gather DMA for both analog inputs and outputs
■ 2-CH 12-bit multiplying analog outputs with waveform
generation
■ 24-CH TTL digital input/output
■ 2-CH 16-bit general-purpose timer/counter
■ Analog and digital triggering
■ Fully auto calibration
■ Multiple cards synchronization through SSI (System
Synchronization Interface) bus or PXI trigger bus
■ Operating Systems
• Windows 7/Vista/XP/2000/2003 Server
• Linux
■ Recommended Software
• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench
■ Driver Support
• DAQPilot for LabVIEW™
• DAQ-MTLB for MATLAB^®
• D2K-DASK for Windows
• D2K-DASK/X for Linux
2-13 _{www.adlinktech.com}
Terminal Boards & Cables
■ DIN-68S-01
Terminal Board with One 68-pin SCSI-II
Connector and DIN-Rail Mounting (Cables are not
included.)
■ ACL-10568-1
68-pin SCSI-VHDCI cable (mating with
AMP-787082-7), 1 M
* For more information on mating cables, please refer to
P2-61/62.
Terminal board DIN-68S-01 &
68-Pin SCSI-VHDCI cable ACL-10568-1
SSI Bus Cables
(for multiple cards synchronization)
■ ACL-SSI-2/3/4
SSI Bus cable for two, three, and four devices
SSI bus cable for multiple card synchronization
(for DAQ/DAQe-2000 series)
Pin Assignment
Connector Pin Assignment
CH0+ 1
CH1+ 2
CH2+ 3
CH3+ 4
EXTATRIG 5
DA1OUT 6
DA0OUT 7
AOEXTREF 8
SDI3_1 / NC* 9
SDI2_1 / NC* 10
SDI1_1 / NC* 11
SDI0_1 / NC* 12
AO_TRIG_OUT 13
AI_TRIG_OUT 14
GPTC1_SRC 15
GPTC0_SRC 16
GPTC0_GATE 17
GPTC0_OUT 18
GPTC0_UPDOWN 19
EXTTIMEBASE 20
AFI1 21
PB7 22
PB5 23
PB3 24
PB1 25
PC7 26
PC5 27
DGND 28
PC3 29
PC1 30
PA7 31
PA5 32
PA3 33
PA1 34
35 CH0-
36 CH1-
37 CH2-
38 CH3-
39 AIGND
40 AOGND
41 AOGND
42 AOGND
43 SDI3_0 / NC*
44 SDI2_0 / NC*
45 SDI1_0 / NC*
46 SDI0_0 / NC*
47 EXTWFTRG
48 EXTDTRIG
49 DGND
50 DGND
51 GPTC1_GATE
52 GPTC1_OUT
53 GPTC1_UPDOWN
54 DGND
55 AFI0
56 PB6
57 PB4
58 PB2
59 PB0
60 PC6
61 PC4
62 DGND
63 PC2
64 PC0
65 PA6
66 PA4
67 PA2
68 PA0
*Pin 9-12 and pin 43-46 are SDI<0..3>_n
for 2010; NC for 2005, and 2006