50.5 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Digital and analog outputs

50.5 ^{Solid State Wind Sensor}
SPECIFICATIONS
Power Requirement
Sensor:


External Heater:
9 -18 VDC
10 mA at 12 VDC – average power
.75 amp pulse for 2 msec. – peak power
15 Volts DC @ 50 watts
Environmental
Operating Temperature:
Extended Temperature Range:
-40°C to +55°C (-40°F to +131°F) no ice
-50°C to +55°C (-58°F to +131°F) with external heater
Physical Characteristics
Weight:
Finish:
5.5 lbs (2.5 kg)
Anodized aluminum & stainless steel
CABLE & MOUNTING
PN 9574
Mounting:
Cable Assembly; specify length in feet or meters
PN 3188 Mounting & Orientation Fixture
Options
PN 50.5H
PN 50.5PS


Wind Sensor with External Heater & Control Box
External Heater Power Source (100 to 240 VAC 50/60 Hz) – 15 VDC @ 4 amps
Heater option must be specified at time of purchase.
Specifications are subject to change at any time.
Met One
Instruments, Inc.
1600 Washington Blvd.,
Grants Pass, OR 97526
Tel [phone]
Fax [phone]
[e-mail]
50.5 Rev.12/2010