50.5 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Digital and analog outputs

50.5 ^{Solid State Wind Sensor}
High Quality Sonic Wind Sensors
The 50.5 Solid State Wind Sensor is a continuation of the development work started with
NOAA on sonic wind sensors over 25 years ago. This sensor design contains the same wind
distortion algorithm and factoring that has been proven and accepted in applications
around the world.
No other sensor technology has the history of time proven field performance comparable
to the Solid State Series 50.5 Sensor.
FEATURES
• No moving parts
• Digital and analog outputs
• Built-in sensor emulation
• 16-point wind tunnel calibration with each sensor
• Data output is field set to user requirements
• Optional heating unit allows continuous
operation in ice and snow
• Low maintenance
Met One
Instruments, Inc.
1600 Washington Blvd.,
Grants Pass, OR 97526
Tel [phone]
Fax [phone]
[e-mail]
SPECIFICATIONS
Wind Speed
Range:
Accuracy:
Resolution:
Wind Direction
Range:
Accuracy:
Resolution:
Operation
Sampling Rate:
Data Output Rate:
Sonic Frequency:
Output Signals
Wind Speed Voltage:
Wind Direction Voltage:
RS-232:
Optional Digital Outputs:
50.5 Solid State Wind Sensor
0 - 50 m/sec standard
±0.2 m/sec < 11.3 m/sec or ±2 % > 11.3 m/sec
0.1 m/sec
0° - 360°
±3°
1°
5 per second
1 per second
200 kHz
0 to 1, 2.5 or 5 VDC (specified at time of purchase)
0 to 1, 2.5 or 5 VDC (specified at time of purchase)
1200 to 19.2K Baud (9600 Baud Standard)
SDI-12, RS-422, RS-485 (specified at time of purchase)