10438 Datasheet, PDF (2/5 Pages) List of Unclassifed Manufacturers – Reztore Surface and Mat Cleaner Application Instructions

Specifications
Appearance of solution:
Transparent violet
pH:
6-8
Odor:
Slight floral
Solubility:
Water, acetone,
alcohols
Toxicity, Irritation, Sensitivity: Non-toxic by dermal
contact, or inhalation
Flammability:
Non-flammable
Ion Level:
(mg/l)
Fluoride
0.3
Sulfate
<0.5
Nitrate
1.2
Bromide
<0.5
Phosphate
<0.5
Electrical Properties (Dry Film)
10E7 - 10E8 ohms
Static Decay Rate:
(ref. ANSI/ESD S4.1)
<.01 seconds
(per FTMS 101C
Method 4046)
Testing
It is recommended to test the surfaces after cleaning to
ensure that all insulative contaminants such as dirt and grime
have been removed. Reztore™ Surface & Mat Cleaner was
designed to leave behind a coating which has a surface
resistance of 10⁸ ohms or lower.
FIELD TEST:
For quick and easy verification of surface resistance we
recommend the use of a megohmmeter. These are available
from many Desco Industries companies. For testing of static
fields, we recommend the use of a static field meter. These
instruments are also available from many Desco Industries
companies.
Features
• Cleans bench surfaces
• Leaves static dissipative layer on surface
• Non-toxic
• Non-streaking, quick drying
• Non-aerosol
• No CFC’s - water based
• No alkali or ammonia
• Neutral pH
• Low Volatile Organic Solvents
NOTE: Reztore™ Surface & Mat Cleaner product does
not have a set life span. The chemicals are not known to
degrade over time when stored at the proper temperature
conditions as stated in the Material Safety Data Sheet. We
also recommend that this product be stored in its original
container and be sealed when not in use.
Limited Warranty
Desco Industries Inc. expressly warrants that for a period
of one (1) year from the date of purchase, our Reztore™
Surface & Mat Cleaner will be free of defects in material.
Within the warranty period, the material will be replaced
at our option, free of charge. Call our Customer Service
Department at 781-821-8370 or 00 44 (0) 1892-665313
in Europe for a Return Material Authorization (RMA) and
proper shipping instructions and address. You should
include a copy of your original packing slip, invoice, or
other proof of purchase date. Any material under warranty
should be shipped prepaid to the Desco Industries Inc.
factory. Warranty replacements will take approximately
two weeks.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE
IN LIEU OF ALL OTHER PRODUCT WARRANTIES,
EXPRESSED AND IMPLIED, INCLUDING
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED.
The express warranty will not apply to defects or damage
due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair
products.
Limit of Liability
In no event will Desco Industries Inc. or any seller be
responsible or liable for any injury, loss or damage, direct
or consequential, arising out of the use of or the inability to
use the product. Before using, users shall determine the
suitability of the product for their intended use, and users
assume all risk and liability whatsoever in connection
therewith.
DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone] • Web Site: DescoIndustries.com
TB-7000 Page 2 of 5
© 2012 DESCO INDUSTRIES INC.
Employee Owned