10438 Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – Reztore Surface and Mat Cleaner Application Instructions

DESCO INDUSTRIES INC. Technical Bulletin TB-7000
Reztore™ Surface & Mat Cleaner
Application Instructions
Made in America
Directions
Smooth Surfaces:
Apply Reztore™ Surface & Mat Cleaner to the entire surface
to be treated using either the pump or trigger spray bottle.
Use a lint-free cloth to wipe the surface until dry. For set
stains, let Reztore™ Surface & Mat Cleaner soak on the
surface for 30 seconds before wiping clean.
Figure 1. Reztore™ Surface & Mat Cleaner:
16 ounce (500 ml) spray bottle
1 quart (1 litre) spray bottle
2.5 Gallon (10 litre) Bag-in-Box
Description
Reztore™ Surface & Mat Cleaner is a non-toxic liquid
cleaner used to remove dust, grease, grime, fingerprints,
and solder flux from all surfaces used in a static sensitive
area. Reztore™ Surface & Mat Cleaner leaves no insulative
residue, contains no alkali or ammonia, and is nonflammable.
General Guidelines
Reztore™ Surface & Mat Cleaner is a liquid cleaner which
can be used on a variety of surfaces, especially surfaces
used in a static sensitive environment. Surfaces include but
are not limited to: rubber, vinyl and polyethylene table and
floor mats, field service kits, laminated table tops, tote boxes,
epoxy, painted surfaces, plexiglass, glass, metal, 3-ring
binders, computer screens, computer keyboards, shelving,
push carts, conveyor belts, etc.
Note: Cleaners containing silicone will leave an insulative
film. A dissipative ESD worksurface may not fulfill its function
if covered by an insulative layer. Many general purpose
cleaners contain silicone.
“Periodic cleaning, following the manufacturer’s
recommendations, is required to maintain proper electrical
function on all work surfaces. Ensure that cleaners that are
used do not leave an electrically insulative residue common
with some household cleanersd that contain silicone.” (ESD
Handbook ESD TR20.20 section 5.3.1.14 Worksurface
Maintenance)
“Only cleaning materials or processes which do not degrade
the properties of the ESD protective items, shall be used.”
(EN 61340-5-1 clause 5.5 EPA working practices)
Figure 2. Applying Reztore™ to the mat.
Other Surfaces - Keyboards:
Dampen a lint-free cloth or a lint-free swab with Reztore™
Surface & Mat Cleaner. Wipe surface to be cleaned using
either the cloth or swab. The swab will work best for tight
spots like between keyboard keys. Use the cloth to wipe
clean the remaining surfaces of the keyboard.
Figure 3. Cleaning a keyboard or computer screen with
Reztore™ Surface & Mat Cleaner.
On non-ESD surfaces, we recommend using Reztore™
Topical Antistat static dissipative coating. While coating is
on the surface it will enhance existing ESD surfaces and will
give dissipative electrical properties to insulative surfaces.
DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone] • Web Site: DescoIndustries.com
TB-7000 October 2012 Page 1 of 5
© 2012 DESCO INDUSTRIES INC.
Employee Owned