T-51638D084-FW-A-AA Datasheet, PDF (14/17 Pages) –

PRELIMINARY
9. RELIABILITY TEST CONDITION
(1) Temperature and Humidity
TEST ITEM
HIGH TEMPERATURE
HIGH HUMIDITY OPERATION
HIGH TEMPERATURE STORAGE
LOW TEMPERATURE STORAGE
THERMAL SHOCK(NON-OPERATION)
CONDITIONS
40°C, 90%RH, 240 h
60°C, 96 h
-20°C, 96 h
BETWEEN -20°C (1h) and 60°C(1h),
5 CYCLES
(2) Shock & Vibration
ITEM
CONDITIONS
SHOCK
Shock level: 1470m/s² (150G)
Waveform: half sinusoidal wave, 2ms
(NON-OPERATION) Number of shocks: one shock input in each direction of three mutually
perpendicular axis for a total of six shock inputs
Vibration level: 9.8m/s² (1.0G)(Zero to Peak)
Waveform: sinusoidal
VIBRATION
Frequency range: 5 to 500Hz
(NON-OPERATION) Frequency sweep rate: 0.5 octave /min
Duration: one sweep from 5 to 500 Hz in each of three mutually
perpendicular axis(each x,y,z axis: 1 hour, total 3 hours)
(3) Judgment standard
The judgment of the above tests should be made as follow:
Pass: Normal display image with no obvious non-uniformity and no line defect.
Partial transformation of the module parts should be ignored.
Fail: No display image, obvious non-uniformity, or line defects.
T-51638D084-FW-A-AA
OPTREX CORPORATION
Page 14/17