AMW006 Datasheet, PDF (14/32 Pages) List of Unclassifed Manufacturers – Embedded Wi-Fi Networking Solutions

Design Guidelines, Section 6
AMW006 / AMW106 • Embedded Wi-Fi Networking Solutions
4. The module Reset pin is connected to the internal MCU via a 1k resistor.
We recommend driving the pin. If the pin is not driven, connect a 0.1uF capacitor to ground close to the pin to
bypass noise which may cause unintended reset.
5. Connected to SPI serial flash inside the module.
6 Design Guidelines
6.1 Recommended PCB Footprint
All dimensions in Figure 3 are in thousands of an inch unless otherwise marked.
Figure 3. AMWx06 Recommended Footprint (Top)
ADS-MWx06-106R • Preliminary Data Sheet
©2014-2015 ACKme Networks. http://ack.me
September 1, 2015
Page | 10