APSDM002G15AN-AT Datasheet, PDF (13/21 Pages) List of Unclassifed Manufacturers – SATA-Disk Module 4

SATA-Disk Module 4
APSDMxxxx15Ax-AXX
7. Electrical Specification
Caution: Absolute Maximum Stress Ratings – Applied conditions greater than those listed under
“Absolute Maximum Stress Ratings” may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these conditions or conditions greater than those defined in
the operational sections of this data sheet is not implied. Exposure to absolute maximum stress rating
conditions may affect device reliability.
Table 7-1: Operating range
Range
Standard
Extended Temperature
Ambient Temperature
0°C to +70°C
-40°C to 85°C
5V
4.75-5.25V
Table 7-2: Absolute maximum power pin stress ratings
Parameter
Input Power
Voltage on any pin except V_DD with respect to GND
Symbol
V_DD
V
Conditions
-0.3V min. to 6.5V max.
-0.5V min. to VDD + 0.5V max.
Table 7-3: Recommended system power-up timing
Symbol
Parameter
Typical
Maximum
Units
T_PU-READY1
Power-up to Ready Operation
200
1000
ms
T_PU-WRITE1
Power-up to Write Operation
200
1000
ms
1. This parameter is measured only for initial qualification and after a design or process change that could affect this parameter.
Table 7-4: Typical power consumption (Standard)
Capacity
Modes
Active (mA)
2 GB
187
4 GB
224
8 GB
233
16 GB
220
32 GB
230
Idle (mA)
71
72
72
75
75
Typical power consumption (High-speed)
Capacity
Modes
Active (mA)
4 GB
255
8 GB
333
16 GB
324
32 GB
280
Idle (mA)
85
95
95
77
Note: Results may differ from various flash configurations.
64 GB
300
80
12
© 2011 Apacer Technology Inc.
Rev. 1.0