SNAP-TEX-CBO6 Datasheet, PDF (1/29 Pages) List of Unclassifed Manufacturers – SNAP TEX Cables and Breakout Boards

SNAP TEX Cables and
Breakout Boards
Features
Extend the terminals on your SNAP I/O modules for
easier, cleaner wiring to field devices.
Six-foot (1.8 meter) wiring cables plug into tops of I/O
modules for quick replacement.
Breakout boards offer options such as fusing, power to
loads, and mechanical relays.
Specialty cables integrate older G4 digital I/O with
SNAP PAC I/O.
SNAP TEX Family
SNAP TEX Cables
SNAP TEX cables provide convenient connections from I/O
modules to field wiring. Most cables are designed to connect
to breakout boards; some cables have flying leads for direct
connection to field devices.
Description
SNAP TEX cables and breakout boards are part of the SNAP
TEX family of wiring and mounting accessories. These parts
save time and expense during installation, maintenance, and
debugging by reducing the time and effort required to wire
field devices to SNAP I/O modules.
Choose the cables and breakout boards for your modules
based on the table that starts on page 2.
Specifications, dimensions, and wiring diagrams begin on
page 5.
Part Numbers
Part
SNAP-TEX-CBO6
SNAP-TEX-CBE6
SNAP-TEX-CBS6
SNAP-HD-ACF6
SNAP-HD-BF6
SNAP-HD-CBF6
SNAP-HD-G4F6
SNAP-HD-G4F6N
Description
Cables
6 ft. (1.8 m), 8-wire cable for SNAP I/O
modules. Odd terminals commoned
6 ft. (1.8 m), 8-wire cable for SNAP I/O
modules. Even terminals commoned
6 ft. (1.8 m), 8-wire cable for SNAP I/O
modules. Straight-through; no common
terminals.
6 ft. (1.8 m) wiring harness assembly for
SNAP 16-point digital modules
6 ft. (1.8 m) wiring harness for 32-channel
modules and breakout boards
6 ft. (1.8 m) wiring harness with flying
leads for most 32-point modules
6 ft. (1.8 m) header cable for SNAP-ODC-
32-SNK and SNAP-IDC-32 digital modules
and G4PB16H and G4PB16HC mounting
racks. Also for SNAP-ODC-32-SRC when
connecting to a SNAP-MR10-16C break-
out board.
6 ft. (1.8 m) header cable for SNAP-IDC-
32N digital modules and G4PB16H and
G4PB16HC mounting racks
SNAP TEX Breakout Boards
SNAP TEX breakout boards move terminals away from the
crowded rack area for easier installation and maintenance.
Some breakout boards, such as the SNAP-AIMA-HDB, work
only with specific modules; others are designed to be used
with several types of modules. See tables starting on page 2.
Part Numbers (continued)
Part
Description
Breakout Boards
SNAP-TEX-32
32-point breakout board for SNAP I/O
modules
SNAP-TEX-FB16-H
16-point breakout board for SNAP I/O
modules, with fuses, fuse-blown indica-
tors, & bussed power (120–240 V)
SNAP-TEX-FB16-L
16-point breakout board for SNAP I/O
modules, with fuses, fuse-blown indica-
tors, & bussed power (12–24 V)
SNAP-TEX-MR10-4
Mechanical relay breakout board for a 4-
channel SNAP digital output module
SNAP-TEX-MR10-16
Mechanical relay breakout board for one
high-density or four 4-channel SNAP dig-
ital output modules.
SNAP-TEX-MR10-16C
Mechanical relay breakout board for one
high-density or four 4-channel SNAP dig-
ital output modules. Header connector
connects two boards to one high-density
digital module. Optional jumper straps.
SNAP-IDC-HDB
SNAP-IDC-HDB-FM*
Fused breakout board for SNAP 32-point
digital input modules
SNAP-ODC-HDB
Fused breakout board for SNAP 32-point
SNAP-ODC-HDB-FM* digital output modules
SNAP-AIMA-HDB
SNAP-AIMA-HDB-FM*
Breakout boards for SNAP-AIMA-32 and
SNAP-AIMA-32-FM analog input mod-
ules
SNAP-AIV-HDB
SNAP-AIV-HDB-FM*
Breakout boards for SNAP-AIV-32 and
SNAP-AIV-32-FM analog modules
* Factory Mutual approved
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
© 2008–2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
1