RFM67W Datasheet, PDF (1/37 Pages) List of Unclassifed Manufacturers – ISM TRANSMITTER MODULE

Page 1
RFM67W
RFM67W ISM TRANSMITTER MODULE V1.2
Features
GENERAL DESCRIPTION
The RFM67W is a transmitter
module which can operate in the
315, 433, 868 and 915 MHz
licence free ISM bands.
The transmitter module has two
modes of operation, a
conventional MCU controlled
mode and a ‘stand-alone’
mode which enables the
APPLICATIONS
z Remote Keyless Entry (RKE)
z Remote Control / Security
Systems
z Voice and Data RF
Communication Links
z Process and building / home
control
z Active RFID
z AMR / AMI Platforms
RFM67W to download
KEY PRODUCT FEATURES
configuration and messages from
an E2PROM in response to a user ^z
input.
z
Stand-alone mode makes the
z
RFM67W ideal for miniaturized or
low cost remote keyless entry
z
(RKE) applications. It also offers
the unique advantage of narrow- _z
band and wide-band
communication in a range of
z
modulation formats.
The RFM67W offers high RF
output power and channelized
operation suited for the European ^z
(ETSI EN 300-220-1), North
American (FCC part 15.231,
z
15.247 and 15.249) and
z
Japanese (ARIB T-67) regulatory ^z
+17 dBm to -18 dBm
Programmable output power.
Bit rates up to 600 kbits / sec.
FSK, GFSK, MSK, GMSK and
OOK modulation.
Stand-alone mode: No need
for a host MCU.
Consistent RF performance
over a 1.8 to 3.7 V range.
Low phase noise (-95 dBc/Hz
at 50 kHz) with automated ^PLL
calibration and fully integrated
VCO and loop filter.
On chip RC timer for timer
/wake-up applications.
Low battery detection.
Module size:19.7X16mm
Low cost
standards.
RFM67W
NOTE:
In order to better use RFM67W
modules, this specification also
involves a large number of the
parameters and functions of its
core chip RF67's,including those
IC pins which are not leaded
out. All of these can help
customers gain a better
understanding of the
performance of RFM67W
modules, and enhance the
application skills.
Page 1
Tel: [phone] Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com