RB6122-16-1M0 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – EMC/EMI Chokes RB Series

EMC/EMI Products
Current-compensated Chokes
EMC/EMI Chokes
RB Series
I Rated currents from 16 to 50 A
I Up to 600 VAC or 1000 VDC
I 2- and 3-wire configurations
I Horizontal and vertical PCB
mounting types
I Ruggedized saturation and thermal
behavior
I Open construction for forced and
convection cooling
I Straightforward pin-out for easy PCB
design
Approvals
Technical specifications
Typical electrical schematic
Maximum continuous operating voltage:
600 VAC / 1000 VDC
L1
L1'
Operating frequency:
DC to 400 Hz
Rated currents:
16 to 50 A @ 60°C max. convection cooling
High potential test voltage
2500 VAC, 60 sec, guaranteed, 2 sec factory test
winding-to-winding @ 25°C:
Temperature range (operation and storage):
-40°C to +125°C (40/125/21)
L2
L2'
Flammability corresponding to:
UL 94V-0
Cooling:
convection / forced cooling
MTBF @ 40°C / 230 V (Mil-HB-217F):
> 5,000,000 hours
L3
L3'
RB common-mode chokes are mainly used
to filter EMI noise on AC power lines up to
600 VAC but they are as well applicable in DC
power lines of photovoltaic installations or
similar applications up to 1000 VDC.
EMI noise of electronic equipment can go to
the power lines and disturb the proper func-
tion of other devices like TV sets or radios.
Thus noise generated by the equipment from
switched power electronics or by high slew
rates of controllers needs to be filtered.
RB common-mode chokes are used to sup-
press EMI noise in PCB integrated filter desi-
gns with line bypass capacitors or in combi-
nation with single phase filters for extra low
leakage filter designs.
Features and benefits
I Cost-effective PCB designs for up to
80 A with forced cooling *
I Compact size and light weight
I Low magnetic leakage flux
I Excellent winding insulation
I Standardized foot print
I Broad range of inductance ratings
I Custom-specific versions on request
* See Application Note for forced cooling
Typical applications
I AC and DC filtering for midsize
power range drives, photovoltaic inverters,
fast chargers, charging stations, UPS and
switch mode power supplies
I Filter with low leakage current noise
or improved immunity against grid
disturbances
I Electronic devices, automation
I Converters