QC01 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Smart - Control Modules

Product data sheet
Sheet No.: 1.604.01 - Rev: E - Page 1 of 3
Date:
October, 2006
FieldQ
Smart - Control Modules
QC01: (24VDC) & QC02: (85-254VAC)
Description:
These FieldQ QC01 and QC02 Smart Control Modules offer
an integrated concept for "On/Off" valve automation. Its
compact and robust construction incorporates IPT technology
with auto-initialization for easy setting of feedback switches.
Construction:
The Control Module is mounted at the side of the Pneumatic
Module in front of the basic actuator housing. Inside are
terminals available for connecting control and feedback
wiring. Two cable entries are available for this purpose.
Features:
- Supports both single and double acting actuators.
- One entry for all wiring (control and feedback).
- IPT-technology (Intelligent Position Tracking).
- Automatic initialization for easy setup of the actuator.
Pressing 4 seconds simultaneously the "Open" and
"Closed" reassignment buttons starts auto-initialization
procedure and sets automatically the feedback limit
switches.
- Readjustable or Reversible position feedback using the
reassignment buttons.
- Three indication LED's for "Status", "Open" and "Closed"
position. Status LED indicates:
- Initialization procedure running (blinking)
- Successful initialization procedure (LED is on)
- No or failed initialization
(flashing)
- Control Module is easily plugged in the Pneumatic
Module.
- Modular functionality for easy update towards present and
future bus systems.
- The power supply and all inputs and outputs are
galvanic isolated which offers greater flexibility for
systems connection.
General Specifications:
Material housing
: Aluminium alloy
Cable entries
: 2x M20x1.5 or 2x 1/2"NPT
Electrical connections : Internal terminal strip.
Enclosure
: IP65 / NEMA 4X
Finish
: Polyester non-TGIC based powder
coating.
Operating media
: Air or inert gasses, filtered at 50
micron
Temperature
: -20° to +80°C / -4° to 176°F
Dimensions
: See 1.603.01 metric
See 1.603.04 imperial/UNC
See 1.603.02 DIN 3337
FieldQ Button board
Push
4 sec.
Closed reassignment button
Closed LED
Status LED
Open LED
Open reassignment button
Status LED:
on
off
on
off
Time
LED =
Flashing
LED =
Blinking
TM
www.FieldQ .com
Copyright © Emerson Process Management. The information in this document is subject to change without notice. Updated data sheets can
be obtained from our web site www.Fieldq.com or from your nearest Valve Automation Center: America's: [phone]
(fax [phone]) Europe: [phone] (fax [phone]) Asia/Pacific: [phone] (fax [phone])