PDUMH15ATNET Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – Single-Phase Auto Transfer Switch / Switched PDU, 1.4kW 15A 120V, 1U Horizontal Rackmount

Single-Phase Auto Transfer Switch / Switched PDU,
1.4kW 15A 120V, 1U Horizontal Rackmount, 8 NEMA
5-15R outlets, 2 NEMA 5-15P inputs
MODEL NUMBER: PDUMH15ATNET
Highlights
Single phase 15A 120V Auto
Transfer Switch / ATS PDU
Enables redundant-power option
for single-corded network devices
Separate primary & secondary
inputs connect to any two
compatible power sources
1U horizontal rackmount; 2
NEMA 5-15P inputs; 8 NEMA
5-15R outlets
Individually switched outlets,
network interface and 2 digit
visual current meter
Applications
ATS PDU systems provide a
redundant power option with
individual outlet control for
Description
single-corded network devices
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network
Package Includes
devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The
PDU with attached 5-15P input
ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary
power cord
power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until
Detachable C13 to NEMA 5-15P
the primary input is restored and stable. Switched PDU features include individually controllable output
12 ft/3.6m secondary input cord
receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources
Installable 1U mounting brackets
occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless
User manuals with warranty
of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant
information
hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord
is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer
time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains
circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both
input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or
secondary power availability.
Features
120V 15A Power Disrtibution Unit (PDU) with Auto-Transfer Switch (ATS) and Switched output receptacles (Agency de-rated to 12A continuous)
ATS features provide redundant power for critical network equipment with a single input power cord
Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface
Visual meter reports output power consumption in amps
8 switched NEMA 5-15R outlets; 1U horizontal rackmount form factor; 14.5 in. / 36.8 cm depth
Two NEMA 5-15P inputs connect to separate PRIMARY and SECONDARY power sources
ATS normally maintains output sourced from the primary input; As primary input power fails or becomes unstable, the ATS will switch to power equipment
from the secondary input until power on the primary input is restored and stable
1/4