LF07WBP-6S Datasheet, PDF (1/16 Pages) List of Unclassifed Manufacturers – Miniature Waterproof Shielded Connectors

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
Miniature Waterproof Shielded Connectors
LF Series
Mated dimensions (Example : LF07)
8.9 mm max. (3 pos.)
36.4
Receptacle
Plug
sFeatures
1. Ease of shielded termination and connector
assembly
All components are self-aligning and do not require complex
assembly tooling. The shield of the cable is connected with the
metal housing of the connector using simple shielding clamp,
supplied with the connector.
2. Water and dust protected
IP68 protection rating. Complete protection against dust
penetration and against water penetration when mated
assembly is submerged at the depth of 1.8 meter for 48 hours.
3. Bayonet lock
Short turn bayonet lock assures secure vibration resistant
mating of the connectors.
4. Acquired safety standard
4 pos. is 10A and meets safety standards (TÜV)
Also 3- and 4-pos. have acquired the UL standard.
5. High current rating capacity
Number of contacts
3
4
6, 12 and 20
11
Current rating
5A max.
10A max.
2A max.
10A max.
2A max.
Short turn bayonet lock
Mating:
Insert the plug, and then turn the locking collar clockwise,
as indicated by the coupling direction marking.
2
Receptacle
1
Locking collar
Coupling direction marking ^Plug
Un-mating:
Turn the locking collar counter-clockwise
than pull off the plug.
1
2
Coupling direction marking
Shielding Connection - Plug
Built-in shield
connection spring
Cable shielding connection clamp
Cable
2011.5
1