ICM80000 Datasheet, PDF (1/8 Pages) List of Unclassifed Manufacturers – MODEL ICM8 – ETHERNET GATEWAY

Tel [phone]
Fax [phone]
www.redlion.net
MODEL ICM8 – ETHERNET GATEWAY
Bulletin No. ICM8-C
Drawing No. LP0642
Released 12/11
 ETHERNET GATEWAY FOR RED LION PANEL METERS
 PROGRAMMABLE VIA CRIMSON SOFTWARE
 USB PROGRAMMING PORT
 EXTENSIVE ETHERNET DRIVER LIST ALLOWS EASY DATA
MAPPING TO PLCS, PCS, AND SCADA SYSTEMS
 10 BASE-T/100 BASE-TX ETHERNET
GENERAL DESCRIPTION
The ICM8 is designed to act as an ethernet gateway offering multiple
protocol conversion for Red Lion panel meters. With two serial ports (one
RS232 and one RS485) and a 10 Base-T/100 Ethernet Port, the unit performs
protocol conversion, allowing Red Lion panel meters to communicate
seamlessly to the ethernet network. Programming the unit can be accomplished
via the RS232 or the USB Port using Crimson Software. It is important to note
that this device is designed to function with Red Lion panel meters and will not
offer protocol conversion if a Red Lion Product is not connected to at least one
of the serial ports.
The ICM8’S DIN rail mounting saves time and panel space and snaps easily
onto standard top hat (T) profile DIN rail.
SOFTWARE
The ICM8 is programmed with Windows^® compatible Crimson software.
The software is an easy to use graphical interface which can be purchased as part
of a kit that includes a manual and cables, or downloaded free of charge from
www.redlion.net.
DIMENSIONS In inches (mm)
1.75 (44.5)
4.15 (105.4)
5.30
(134.7)
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
CAUTION: Risk of Danger.
Read complete instructions prior to
installation and operation of the unit.
SPECIFICATIONS
1. POWER: 24 VDC ± 10% 200 mA max. Must use a Class 2 or SELV rated
power supply.
2. COMMUNICATIONS:
USB/PG Port: Adheres to USB specification 1.1. Device only using Type B
connection.
Serial Ports: Format and Baud Rates for each port are individually software
programmable up to 115,200 baud.
RS232/PG Port: RS232 port via RJ12
COMMS Ports: RS485 port via RJ11
Ethernet Port: 10 BASE-T / 100 BASE-TX
3. LEDs:
STS – Status LED indicates condition of ICM8.
TX/RX – Transmit/Receive LEDs show serial activity.
Ethernet – Link and activity LEDs.
4. MEMORY:
On-board User Memory: 4 Mbytes of non-volatile Flash memory.
On-board SDRAM: 2 Mbytes
1