CONTROL-PIONT-MODULE5000 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Control Point Module (CPM) 5000

Control Point Module (CPM) 5000
®
The Next-generation Neuron Chip
for LonWorks® Control Networks
The CPM 5000 decreases product time-to-market for
LonWorks® based devices. It includes all the components
needed to implement a control node using the FT 5000
Smart Transceiver — the smallest, fastest, highest perfor-
mance, lowest cost twisted pair LONWORKS transceiver
on the market.
The FT 5000 Smart Transceiver based control module integrates the
high-performance Free Topology FT 5000 Smart Transceiver with the
low-cost FT-X3 Communications Transformer, a crystal and inexpensive
serial memory, to deliver a lower-cost, higher-performance LonWorks
solution that dramatically reduces design time and enables a superior
time-to-market.
FEATURES (of the CPM 5000)
• On-board FT 5000 Smart Transceiver Chip.
• Differential Manchester encoded signaling for polarity insensitive
network wiring.
• Transformer-isolation.
• Supported Data Rate - 78 kilobits per second.
• Distances up to 500 meters max for free topology.
• Distances up to 2700 meters max for doubly terminated bus topology.
• Includes 64 KB Serial EEPROM memory.
• In-circuit programming of the I2C serial EEPROM.
• Low power consumption.
• Designed to comply with FCC Level B radiated EMI requirements.
• CSA, TÜV Recognized component.
• LonMark® certifiable.
• 3.3 Volt Support.
• Compact Vertical Mount Configuration.
www.echelon.com