|
AT25DN011 Datasheet, PDF (1/42 Pages) List of Unclassifed Manufacturers – 1-Mbit, 2.3V Minimum SPI Serial Flash Memory with Dual-Read Support | |||
|
AT25DN011
1-Mbit, 2.3V Minimum
SPI Serial Flash Memory with Dual-Read Support
Features
PRELIMINARY DATASHEET
ï¬ Single 2.3V - 3.6V Supply
ï¬ Serial Peripheral Interface (SPI) Compatible
ï¬ Supports SPI Modes 0 and 3
ï¬ Supports Dual Output Read
ï¬ 104MHz Maximum Operating Frequency
ï¬ Clock-to-Output (tV) of 6ns
ï¬ Flexible, Optimized Erase Architecture for Code + Data Storage Applications
ï¬ Uniform 256-Byte Page erase
ï¬ Uniform 4-Kbyte Block Erase
ï¬ Uniform 32-Kbyte Block Erase
ï¬ Full Chip Erase
ï¬ Hardware Controlled Locking of Protected Sectors via WP Pin
ï¬ 128-Byte Programmable OTP Security Register
ï¬ Flexible Programming
ï¬ Byte/Page Program (1 to 256 Bytes)
ï¬ Fast Program and Erase Times
ï¬ 1.5ms Typical Page Program (256 Bytes) Time
ï¬ 40ms Typical 4-Kbyte Block Erase Time
ï¬ 320ms Typical 32-Kbyte Block Erase Time
ï¬ Automatic Checking and Reporting of Erase/Program Failures
ï¬ Software Controlled Reset
ï¬ JEDEC Standard Manufacturer and Device ID Read Methodology
ï¬ Low Power Dissipation
ï¬ 350nA Ultra Deep Power Down current (Typical)
ï¬ 5µA Deep Power-Down Current (Typical)
ï¬ 25uA Standby current (Typical)
ï¬ 6mA Active Read Current (Typical)
ï¬ Endurance: 100,000 Program/Erase Cycles
ï¬ Data Retention: 20 Years
ï¬ Complies with Full Industrial Temperature Range
ï¬ Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options
ï¬ 8-lead SOIC (150-mil)
ï¬ 8-pad Ultra Thin DFN (2 x 3 x 0.6mm)
ï¬ 8-lead TSSOP Package
DS-25DN011â038Bâ5/2014
|
▷ |