AS5510-DWLT Datasheet, PDF (1/29 Pages) List of Unclassifed Manufacturers – Linear Hall Sensor with IC Output

General Description
Figure 1:
Added Value of using AS5510
Benefits
Highest reliability and durability
Ideal for battery powered devices
Easy to use
High-resolution output
Operates in wide magnetic range
Smallest form factor
AS5510
Linear Hall Sensor with I²C Output
The AS5510 is a Linear Hall Sensor with 10 bit resolution and I²C
interface. It can measure absolute position of lateral movement
of a simple 2-pole magnet. Depending on the magnet size, a
lateral stroke of 0.5~2mm can be measured with air gaps
around 1.0mm. To conserve power, the AS5510 may be
switched to a power down state when it is not used. It is
available in a WLCSP and SOIC8 package and qualified for an
ambient temperature range from -30°C to +85°C.
Ordering Information and Content Guide appear at end of
datasheet.
Key Benefits & Features
The benefits and features of AS5510, Linear Hall sensor with I²C
output are listed below:
Features
Contactless position measurement
Power down mode
Simple configuration over the I²C interface
10bit resolution
Programmable sensitivity
Available in two different packages: WLCSP & SOIC8
Applications
The AS5510 is ideal for:
• Position sensing
• Servo drive feedback
• Camera lens control
• Closed loop position control.
ams Datasheet
[v1-06] 2014-Oct-30
Page 1
Document Feedback