586-102111-2 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Water resistant Double-make or double-break contacts

WHITE-RODGERS
DC PRODUCTS
Type 586
sealed solenoid
FEATURES
• Water resistant
• Double-make or double-break contacts
• Capable of handling high and low current requirements
• Black impact phenolic casing
ENGINEERING DATA
Contacts
• Pole form–SPNO and SPDT
• Material–silver alloy
• Termination– ⁵/16”-24 UNF-2A thread
Volts DC
6
12
24 & 36
Cont.
200A
200 A
200 A
RATINGS
NO
Inrush
600 A
600 A
600 A
NC
Cont.
Inrush
100A
300 A
100 A
300 A
100 A
200 A
Coils
• Voltage–6 VDC through 48 VDC
• Termination–#10-32 UNF-2A thread
• Power (approximate)
Continuous 12 watts SPDT, 8 watts SPNO
• Connections
Coil isolated (two terminals)
• Operate (77°F/25°C)
67% of nominal coil voltage (intermittent)
110% max. safe of nominal coil voltage
COIL DATA
Resistance in Ohms
Intermittent^§
Continuous
Volts DC SPDT SPNO SPDT SPNO
6
2.2
3.3
3.3
5.25
12
8.4
13.2
13.2
21.0
15
13.1
21.0
21.0
32.8
18
18.4
30.0
30.0
47.0
24
33.6
53.0
53.0
84.0
36
75.6 120.0 120.0 189.0
48
134.0 213.0 213.0 336.0
§ _{Intermittent—special request only}
GENERAL DATA
Dielectric Strength
• 500 Volts
Temperature Range
• -40°F/-40°C to 149°F/65°C
Mechanical Life (no load)
• 100,000 cycles
Electrical Life (rated load—making and break-
ing
200 amp on NO Contacts)
• 50,000 cycles
Mounting Position
• Recommended mounting is vertical plane
with coil terminals up
Weight (approximate)
• SPNO–24.0 oz.
• SPDT–26.0 oz.
Duty Cycle
• Continuous
• Intermittent—10 seconds “on” maximum
and minimum 60 seconds “off”
One minute “on” maximum and minimum
6 minutes “off”
Hardware Torque Specification
• Contact Terminal: 60 inch-lbs. max.
• Coil Terminal: 12-18 inch-lbs. max.
St. Louis, Missouri Markham, Ontario
314-553-3600 905-948-3411
www.white-rodgers.com
The Emerson logo is a
trademark and a service mark
of Emerson Electric Co.
R-4005B
1232