BC41B143A-DS-003PC Datasheet, PDF (85/94 Pages) List of Unclassifed Manufacturers – BlueCore 4-ROM Plug-n-Go Single Chip Bluetooth v2.0 + EDR System

Product Reliability Tests for BlueCore4-ROM Plug-n-Go Automotive
12 Product Reliability Tests for BlueCore4-ROM Plug-n-Go
Automotive
12.1 AEC-Q100
The reliability tests in this section follow the tests outlined in the AEC-Q100 and were performed on BlueCore4-ROM
Plug-n-Go in VFBGA 10 x 10mm 96 I/O (lead-free solder balls). Samples are electrically tested at ambient
temperature.
This package qualification will (where moisture sensitivity preconditioning is required) use IPC/Jedec MSL3, i.e., the
finished product is allowed a maximum exposure to a ≤30°C/60%RH environment for 168 hours before mounting.
As part of CSR's automotive test program, customers will have access to the initial device reliability test report. They
will also have access to a quarterly reliability test report update for automotive parts.
Die
ESD
Early Life
Hot Life Test
Test Conditions
Human Body Model
125°C VDD_max
125°C VDD_max
Specification
JEDEC
48 hours
1000 hours
Sample Size
24
2400
90, 77, 77
Package
Moisture
Sensitivity
Precon
JEDEC Level 3
Temperature Cycling
Autoclave (Steam)
Temperature Humidity Bias
Thermal Shock
High Temperature Storage
Test Conditions
(125°C 24 hours)
30°C/60%RH
-65/150°C
121°C/100%RH
85°C/85%RH Vdd_max
-55/125°C
150°C
Specification
192 hours five reflow
simulation cycles
500 cycles
96 hours
1000 hours
100 cycles
1000 hours
Sample Size
783
231 from Precon
231 from Precon
231 from Precon
77 from Precon
77
Other
Bond Shear
Wire Pull
Solder Ball Shear
Visual Inspection and
Dimensions
Test Conditions
Acid decapsulation of finished product
Acid decapsulation of finished product
Two reflow cycles
N/A
Sample Size
30 bonds
60 wires from Precon and
temperature cycling
150 balls
30 devices
BC41B143A-ds-003Pc
Advance Information
© Cambridge Silicon Radio Limited 2005
Page 85 of 94