JM60030-1CR Datasheet, PDF (7/12 Pages) List of Unclassifed Manufacturers – Class J modular ferrule and knifeblade fuse blocks

Class J modular ferrule and knifeblade fuse blocks
Technical Data 10488
Effective February 2016
Table 6: Class J 100 to 600 amp knifeblade blocks and covers
Fuse
amp
range
Poles Catalog nos.
Covers*
Indicating**
Non-indicating
1
JM60100-1CR
70-100
2
JM60100-2CR
CVR-J-60100
CVRI-J-60100
3
1
110-200 2
3
1
2
3
225-400
1
2
3
1
450-600 2
3
JM60100-3CR
JM60200-1CR
JM60200-2CR
JM60200-3CR
JM60400-1CR
JM60400-2CR
JM60400-3CR
JM60400-1MW22
JM60400-2MW22
JM60400-3MW22
JM60600-1CR
JM60600-2CR
JM60600-3CR
CVR-J-60200
CVR-J-60400
CVR-J-60600
CVRI-J-60200
CVRI-J-60400
CVRI-RH-60600
* Covers sold separately.
** Open fuse indication requires 90 volts minimum and closed circuit to operate.
*** Ratings for copper and aluminum conductors except where otherwise noted.
Conductors***
Solid and stranded
—
1/0-3 AWG; (2) Cu 4-6 AWG
2 4-6 AWG; (2) Cu 8 AWG
8 AWG; (2) Cu 10-14 AWG
Cu 10-14 AWG; Al 10-12 AWG
250kcmil-1 AWG
2-6 AWG; (2) Cu 2-6 AWG
600kcmil
500kcmil-4 AWG
(2) Cu 3/0 - 4 AWG
(2) Al 3/0 - 4 AWG
2 (2) 500kcmil-4 AWG
Fine stranded
Cu 1-3 AWG
Cu 4-6 AWG
Cu 8 AWG
—
—
Cu 3/0-1 AWG
Cu 2-6 AWG
N/A
Torque
N•m (lb-in)
6.2 (55)
5.6 (50)
5.1 (45)
4.5 (40)
4.0 (35)
42 (375)
31 (275)
57 (500)
51 (450)
57 (500)
34 (300)
N/A
51 (450)
Recommended Bussmann series fuses:
Description
Ultimate protection Low-Peak^® LPJ time-
delay fuses
Advanced protection Limitron™ JKS fast-
acting fuses
Amps Data sheet no.
70 to 600 1007
up to 600 1026
Probe holes for easy testing
without removing cover
Finger grips on cover
for easy removal
Optional see-through, snap-on
cover for easy visual inspection
Optional open fuse indication
speeds troubleshooting
Lockout/tagout feature
improves safety
Vent slots improve cooling*
Standard phase barriers
for additional safety
Multiple mounting holes for
each pole provide flexible,
secure mounting
Finger-safe wire entry
with cutout tabs for larger
wires on all versions
Toolless interlocking modular design
for easy point-of-use assembly
*No fuse derating necessary.
Standard dual lugs on
600A blocks and optional
dual lugs on 400A blocks
for easier wiring using
two, smaller conductors.
Eaton.com/bussmannseries
7