JM60030-1CR Datasheet, PDF (6/12 Pages) List of Unclassifed Manufacturers – Class J modular ferrule and knifeblade fuse blocks

Technical Data 10488
Effective February 2016
Installing/removing covers
Install cover:
Position cover
over block and
push straight
down until it
snaps/clicks
into place.
Installing blocks on DIN-Rail
Class J modular ferrule and knifeblade fuse blocks
Open cover:
Using both
outside handles,
pull straight up.
For larger conductors, trim center tab
at notch as show in detail A.
Trim tab
here
A
Detail A
Place one edge of DIN-Rail in fuse block base, then rotate block down until it clicks into place.
6
Eaton.com/bussmannseries