MC2310 Datasheet, PDF (37/59 Pages) List of Unclassifed Manufacturers – Technical Specifications for Brushless Servo Motion Control

CP chip
Pin Name and
number
Direction Description
Vcc
2, 7, 13, 21, 35, 36, 40, CP digital supply voltage. All of these pins must be connected to the supply
47, 50, 52, 60, 62, 93, voltage. V_cc must be in the range 4.75 - 5.25 V.
103, 121
WARNING! Pin 35 must be tied HIGH with a pull-up resistor. A
nominal value of 22K Ohms is suggested.
GND
Unassigned
(MC2340)
3, 8, 14, 20, 29, 37, 46, CP ground. All of these pins must be connected to the power supply return.
56, 59, 61, 71, 92, 104,
113, 120
5, 30-34, 38, 39, 42, These signals may be left unconnected (floating).
48, 57, 78-81, 131
MC2300 Technical Specifications
37