CM-BF548 Datasheet, PDF (15/26 Pages) List of Unclassifed Manufacturers – Bluetechnix Mechatronische Systeme GmbH

Figure 3-4: Recommended Footprint for Baseboard Design (top view)
Figure 3-4 shows the footprint of the connector looking through the board. The RED Pads of the
connectors are shown in top view as placed on the top layer of an application Board. The fixing holes on
top-right and bottom-left can be omitted, if no shock lock is required. For the exact connector footprints
please refer to the manufacturer homepage.
Info: A Library of the Baseboard module for the Altium Designer 6.x can be obtained from Bluetechnix
upon request.
Blackfin CM-BF548 Hardware User Manual
14