CM-BF548 Datasheet, PDF (10/26 Pages) List of Unclassifed Manufacturers – Bluetechnix Mechatronische Systeme GmbH

 Low Voltage Reset Circuit
o Resets module if power supply goes below 2.93V for at least 140ms
 Dynamic Core Voltage Control
o Core voltage can be adjusted by setting software registers on the Blackfin processor
o Core voltage range: 0.8 – TBD
 Expansion Connector A – 100pins
o Data Bus
o Address Bus
o Control Signals (Memory Control, Reset, Interrupt, Timer)
o PC (0..13) SD-IO Signals, SPORT, GPIO
o PJ (1..13) Atapi Signals, GPIO
o PH (0..7)
o ClkOUT, CLKBUF
o USB-OTG
o JTAG
o Boot Mode Pins
o Power Supply
 Expansion Connector B – 100pins
o PA (0..15) Main functions: SPORT, GPIO, Timer
o PB (0..14) Main functions: SPI, UART, I2C, GPIO, Timer
o PD (0..15) Main functions: Host Port, SPORT, PPI0, PPI1, PPI2
o PE (0..15) Main functions: SPI, UART, I2C, PPI1, GPIO
o PF(0..15) Main functions: PPI0, GPIO
o PG(0..15) Main functions: CAN1,2 , PPI0, SPI, Host Port, GPIO
1.2 Key Features
 Allows quick prototyping of product that comes very close to the final design
 Reduces development costs, faster time to market
 Very cost effective for small and medium volumes
1.3 Target Applications
 Generic high performance signal processor module
 Automotive Applications
 GUI Based Web Appliances
 Robotics: Tiny processor module for mobile robots
1.4 Further Information
Further information, and document updates are available on the product homepage:
http://www.bluetechnix.com/goto/cm-bf548
Blackfin CM-BF548 Hardware User Manual
9