CLS551 Datasheet, PDF (1/7 Pages) List of Unclassifed Manufacturers – CCD Linescan controller sensor

CLS 551
ccd linescan
controller
Key Features:
CCD Linescan controller
Designed for Sony ILX 551
All clock signals included.
Start of frame output.
Selectable exposure time.
nc
φOSC
te
RESET
nc
VCC
VCC
nc
ts0
ts1
ts2
6 5 4 3 2 1 44 43 42 41 40
7
39
8
38
9
37
10
36
11
CLS 551
35
12
Top View
34
13
33
14
32
15
31
16
30
17
29
18 19 20 21 22 23 24 25 26 27 28
SOS
PCLK
nc
nc
nc
VCC
nc
φCLK
φROG
nc
nc
Overview:
The CLS 551 is an easy to use,
complete ccd linescan controller,
designed for the SONY ILX 551
linescan sensor.
For operation the CLS 551 requires
power +5 V only, and a 10 MHz TTL
or CMOS clock input signal. Additional
logic is not required.
To provide more flexibility, the CLS
551has an interface to control
exposure time and pixel clock. All
inputs are connected to internal pull
up resistors, so they can left
unconnected if not required.
Interface:
The CLS 551 linescan controller
includes all CCD-timing signals
including pixel clock and exposure
control.
The digital interface provides user
selectable pixel clock and exposure
time. An output for pixel clock and
start of frame facilitates the operation
with an additional frame grabber.
With an additional oscilloscope and a
Sony IILX 551 CCD-sensor the CLS
551converts to a complete very low
cost CCD-linescan camera with
display. (See the application on the
last page).
Absolute Maximum Ratings
VCC Supply voltage
Input voltage applied
Digital output current
Storage temperature
Operating temperature
- 0.5 V to + 6 V
- 0.5 to Vcc + 0.5 V
0 to 5 mA
- 20 to 150 °C
0 to 50 °C
DC Characteristics
Output low voltage (8 mA)
Output high voltage (-4 mA)
Input pullup current
Input low Voltage (max)
Input high voltage (min)
0.4V
2.4V
-0.15 mA
0.8 V
2.0V
Power requirements:
+5V 200mA
www.khs-instruments.com C551_01 Rev 1.01 / 06.2001 Specifications are subject to change without
1/7