BC01B Datasheet, PDF (1/15 Pages) List of Unclassifed Manufacturers – Single Chip Bluetooth Device

Product Data Sheet
Device Features
Compliant to Bluetooth specificatio^Tn^M V1.1
Small footprint in 8mm x 8mm 81-ball BGA
Fully integrated RF block with no external
adjustments or trim
USB V1.1 compliant
Qualified Bluetooth firmware included
Extensive built-in-self-test to minimise end
product final test time
RF reference designs available
Low power consumption/optimisation
Support for up to 7 slaves
General Description
BlueCore01b^TM is a single chip radio and baseband IC
for Bluetooth^TM 2.4GHz radios, and is implemented in
CMOS technology.
When used with external flash containing the CSR
Bluetooth software stack, it provides a fully compliant
Bluetooth system for data and voice communications.
SPI
RAM
BlueCore^TM01b
Single Chip Bluetooth Device
Product Data Sheet For:
BC01b-USB
(USB and UART version)
(BGA Packaging)
BC01b-URT
(UART only version)
(BGA Packaging)
BC01bv-USB
(USB and UART version)
(VFBGA Packaging)
BC01bv-URT
(UART only version)
(VFBGA Packaging)
Applications
Laptop and desktop PCs
Mobile Phones
Cordless Headsets
Personal Digital Assistants (PDAs)
Computer Accessories (Compact Flash,
PCMCIA and SD cards)
Domestic and industrial appliances
RF IN
2.4GHz
Radio
RF OUT
DSP
µP
UART/USB
The design is optimised to require very few external
I/O
RF components to facilitate rapid design of the applica-
tion printed wiring board, and therefore the fastest pos-
PIO
sible time to market and lowest overall cost.
A low intermediate frequency receiver is utilised to
allow on-chip channel filtering. All hardware is fully
PCM
compliant with the Bluetooth specification.
The device operates from a regulated supply in the
range 2.7V to 3.3V and is available in an 81-ball BGA
package.
XTAL
EXTERNAL
FLASH
Figure 1: BlueCore01b Block Diagram
bc01b-ds-003d
Production Information