ICM107 Datasheet, PDF (9/20 Pages) List of Unclassifed Manufacturers – ICM107B Mega pixel Color CMOS image sensor

ICM107B Mega pixel CMOS sensor
Data sheet Version 0.5, January 2002
3. SIF Registers
Addres
s
0x00
Name
PART_CONTROL
Default
0
0x01
0x02
TIMING_CONTROL_LO
W
TIMING_CONTROL_HIG
H
0x0011
Description
Processing control
[0] 0: normal video mode, 1: single frame
mode
[1] Slope adjustment enable
[2] Exposure time control, writing a 1 will
activate the new value set in
AD_EXPOSE_TIME, when read back from it,
0 means either the exposure time change is
finished (in video mode) or the entire frame
is transmitted (in single frame mode), 1
means either the exposure time change is still
in progress (in video mode) or the frame is
yet to finish (in single frame mode)
[3] 0: normal mode, 1:sub-sampling mode
[6:4] Frame rate,
0: 30 fps
1: 15 fps
2: 10 fps
3: 5 fps
4: 4 fps
5: 3 fps
6: 2 fps
7: 1 fps
[7] Latent change, writing a 1 means the
changed latent registers now starts taking
effect, when the entire operation is done, the
read back value of this bit will change from 1
to 0.
Timing control
[0] Column count enable, set to 0 reserved,
set to 1 when normal operation
[1] HSYNC polarity, 0: active low, 1: active
high, the initial value is determined by
DOUT[5]
[2] VSYNC polarity, 0: active low, 1: active
high, the initial value is determined by
DOUT[6]
[3] Auto dark correction enable
[4] Timing select, 0: wave table timing, 1:
default timing
[6] Flash polarity, 0: active low, 1: active high
[7] Blank polarity, 0: active low, 1: active high
[8] reserved
©2000, 2001,2002 IC Media Corporation & IC Media Technology Corp
web site: http://www.ic-media.com/
web site: http://www.ic-media.com.tw/
page 9
10/29/2002
Confidential