FGPMMOPA5 Datasheet, PDF (9/21 Pages) List of Unclassifed Manufacturers – 51-channel GPS Engine Board

FGPMMOPA5
Datasheet
Rev.A04
GPIO_B (Pin4)
Reserved for customized purpose. If not used, keep floating.
1PPS (Pin7)
This pin provides one pulse-per-second output from the module, which is synchronized to GPS
time. If not used, keep floating.
ENABLE (Pin8)
Keep open or pull high to Power ON. Pull low to shutdown the module.
TX0 (Pin9)
This is the UART transmitter of the module. It outputs the GPS information for application.
RX0 (Pin10)
This is the UART receiver of the module. It is used to receive software commands and firmware
update.
TX1 (Pin11)
Not used, keep floating.
RX1 (Pin12)
Not used, keep floating.
NRESET (Pin13)
With a low level, it causes the module to reset. If not used, keep floating.
The document is the exclusive property of GlobalTop Tech Inc. and should not be distributed, reproduced, or any other format
without prior permission of GlobalTop Tech Inc. Specifications subject to change without prior notice
GlobalTop Tech Inc.
3^rd Floor., No.7 Nan-ke 3^rd Rd Science-based Ind. Park, Tainan 741-47, Taiwan, R.O.C.
Tel:[phone] Fax:[phone] http://www.gtop-tech.com/ email: [e-mail]
Copyright© 2008 GlobalTop Tech Inc. All right reserved.
9