OC-3 Datasheet, PDF (8/10 Pages) List of Unclassifed Manufacturers – 1310 nm Single-mode Transceiver (S1.1) 1x9, SC Duplex Connector, 3.3 V

1310 nm Single-mode Transceiver (S1.1)
1x9, SC Duplex Connector, 3.3 V
155 Mbps ATM/SONET OC-3/SDH STM-1
Recommended Board Layout Hole Pattern
Unit : mm(inches)
This transceiver is compatible with industry standard wave or hand solder processes. After wash process, all moisture
must be completely remove from the module. The transceiver is supplied with a process plug to prevent contamination during
wave solder and aqueous rinse as well as during handling, shipping or storage.
Solder fluxes should be water-soluble, organic solder fluxes. Recommended cleaning and degreasing chemicals for
these transceivers are alcohol’s (methyl, isopropyl, isobutyl), aliphatics (hexane, heptane) and other chemicals, such as soap
solution or naphtha. Do not use partially halogenated hydrocarbons for cleaning/degreasing.
http:// www.ritekom.com
Version 3.3
Headquarters :
No. 669, Sec. 4 Chung Hsing Road
Chudung, HsinChu, Taiwan 310, ROC
Tel: [phone]
Fax: [phone]
8/10
Date: 2003/02/17