M186E Datasheet, PDF (8/8 Pages) List of Unclassifed Manufacturers – Stainless Steel 18 mm Barrel-style DC Photoelectric Sensors

EZ-BEAM M18 Series Sensors
Aperture Kits for M18 Series Opposed-Mode Sensors
Aperture kits are available for M18 Series opposed-mode sensors. Apertures are used to narrow and/or shape the sensor’s effective beam for
use in specialized applications.
Model
Description
AP18SC
AP18SR
Kit includes round apertures of:
0.5 mm (0.02"), 1.0 mm (0.04") &
2.5 mm (0.10") in diameter
Kit includes rectangular apertures of:
0.5 mm (0.02"), 1.0 mm (0.04") &
2.5 mm (0.10") wide
Each kit also includes a thread-on
aperture housing, a Teflon FEP^® lens
and two 0-rings
NOTE: Aperture adds 3/16" to sensor length.
Aperture styles available
Round Rectangular
Aperture
(Rectangular type shown)
Lens
Housing
22.4 mm
(0.88")
Outside Diameter
12.7 mm
(0.50")
O-ring (2)
!
WARNING . . . Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: [phone] • www.baneng.com • Email: [e-mail]