M186E Datasheet, PDF (7/8 Pages) List of Unclassifed Manufacturers – Stainless Steel 18 mm Barrel-style DC Photoelectric Sensors

EZ-BEAM M18 Series Sensors
Mounting Brackets
SMB18A
• 11-gauge stainless steel
• Right-angle bracket with a curved mounting slot
for versatility and orientation
SMB18C
• 18 mm split clamp, black thermoplastic polyester
• Stainless steel mounting hardware included
18.5 mm
(0.73")
30°
30 mm
(1.2")
25.4 mm
(1.00")
41 mm
(1.6")
R 24.2 mm
(0.95")
ø 4.6 mm*
(0.18")
4.6 mm*
(0.18")
7.6 mm
(0.30")
46 mm
(1.8")
* Use 4 mm (#8) screws
to mount bracket.
Drill screw holes
24.2 mm (0.95") apart.
Clearance for M4 (#8) hardware
40.0 mm
(1.60")
42.4 mm
(1.67")
14.0 mm
(0.55")
30.0 mm
(1.18")
13 mm
(0.5")
21.1 mm
(0.83")
2.5 mm
(0.10")
Nut Plate
M5 x 0.8
x 60 mm
Screw (2)
SMB18SF
• 18 mm swivel bracket
• Black thermoplastic polyester
SMB18UR
• 2-piece universal swivel bracket for 18 mm sensors
• 300 series stainless steel
M18 x 1
internal
thread
42.0 mm
(1.65")
36.0 mm
(1.42")
10.6 mm
(0.42")
22.9 mm
(0.9")
SMB30SK
50.8 mm
(2.00")
25.4 mm
(1.00")
• Flat-mount swivel bracket with extended range of
motion
• Black reinforced thermoplastic polyester and 316
stainless steel
18 mm
Clearance
50.8 mm
(2.00")
66.5 mm
(2.62")
56.7 mm
(2.31")
Assembled
78.0 mm
(3.07")
68.0 mm
(2.68")
29.0 mm
(1.14")
Banner Engineering Corp. • Minneapolis, U.S.A.
Website: http://www.baneng.com • Tel: [phone]
16.0 mm
(0.63 ")
66.0 mm
(2.60")
27.2 mm
(1.07")
SMB18UR Top
ø18.3 mm
(0.72")
45.2 mm
(1.78")
ø20.3 mm
(0.80")
ø30.5 mm
(1.20")
R2.5 mm
(0.10")
50.8 mm
(2.0")
60º
2.7 mm
(0.10")
60º
20.8 mm
(0.82")
41.7 mm
(1.64")
24.6 mm
(0.97")
25.4 mm
(1.00")
46.7 mm
(1.84")
9.7 mm
(0.38")
SMB18UR Bottom
60º
4X 6.9 mm
(0.27")
41.7 mm
(1.64")
8.1 mm
(0.32")
25.4 mm
(1.00")
63.5 mm
(2.50")
20.3 mm
(0.80")
20.3 mm
(0.80")
ø30.5 mm
(1.20")
6X #10-32 Thru
20.8 mm
(0.82")
33.8 mm
(1.33")
71.1 mm
(2.80")
2.7 mm
(0.10")
page 7