M150XN07 Datasheet, PDF (8/26 Pages) List of Unclassifed Manufacturers – 15.0” XGA Color TFT-LCD Module

TCO 99 certification requirements and test methods:
1) Diagrammatic：
m_d
L_max，₊₃₀°and L_min，₊₃₀°
Effective area：W×H
2) D is the diagonal of the screen in centimeters. And m_d is as follow.
m_d(cm)=D×1.5 with a minimum distance：m_d=50 cm
3) The measurement positions shall consist of an active white square of size 4 by 4 cm.
4) Measure L_max，₊₃₀°and L_min，₊₃₀°that are given as points L & R. And then rotated to an azimuth angle of –30
degrees and measure L_max，_-30°and L_min，_-30°again using the same procedure.
5) The variation in luminance ratio is calculated as the ratio:
L_R =(( L_max，₊₃₀°/ L_min，₊₃₀°)＋(L_max，_-30°/ L_min，_-30°))/2 ≦ 1.7
Note 4:
1/2
1/6
2/3 1/2 1/3 1/6
A
184 gray level
1/6
1/2
B
A’
184 gray level
1/6
1/3
1/2
B’
2/3
Unit: percentage of dimension of display area
l L_A-L_A’ l / L_A x 100%= 1.2% max., L_A and L_B are brightness at location A and B
l L_B-L_B’ l / L_B x 100%= 1.2% max., L_A’ and L_B’ are brightness at location A’ and B’
0 gray level
(C) Copyright AU Optronics, Inc.
Feb. 2003 All Rights Reserved.
No Reproduction and Redistribution Allowed.
M150XN07
Ver0.1
8/28