ICM202B Datasheet, PDF (8/36 Pages) List of Unclassifed Manufacturers – CIF/QCIF CMOS image sensor with digital YUV output

ICM202B CIF/QCIF CMOS sensor with digital YUV output
Data Sheet V2.0, February 2003
Sharpening Low Tone Threshold.
1.7 Color saturation control
The color saturation can be enhanced by adjusting the Saturation Factor register 0x2D
(AD_SATURATION, Default = 0x30).
The following examples show how to set the Saturation to 0, 1, 1.5, and 2:
Saturation 0 : AD_SATURATION = 0x00, no color (B/W)
1 : AD_SATURATION = 0x20
1.5: AD_SATURATION = 0x30
2.0: AD_SATURATION = 0x40
1.8 Gamma Correction
To boost darker signal to match the video monitor characteristic, gamma correction are performed:
Use register 0x24 (AD_GAMMA) to select one of them:
AD_GAMMA 0 : Gamma = 1 (no Gamma)
AD_GAMMA 1 : Gamma = 1.3
AD_GAMMA 2 : Gamma = 1.5
AD_GAMMA 3 : Gamma = 1.8
AD_GAMMA 4 : Gamma = Normal Mode
AD_GAMMA 5 : Gamma = Brighter Mode
AD_GAMMA 6 : Gamma = Higher Contrast Mode
1.10 Brightness
The Brightness offset can be adjusted by Brightness Offset register 0x2B (AD_BRIGHT_OFFSET,
Default =0). The default value =0 means the Brightness is not adjusted.
The following examples show how to increase/decrease the Brightness Level:
Increase Brightness by 10: AD_BRIGHT_OFFSET = 0x0A
Decrease Brightness by10: AD_BRIGHT_OFFSET = 0x8A
©2000, 2001,2002, 2003 IC Media Corporation & IC Me8dia Technology Corp
web site: http://www.ic-media.com/
web site: http://www.ic-media.com.tw/
page 8
2/5/2003
Confidential